A&R Land Services is a veteran and fireman owned crew preparing pole barn and shop pads in Yadkinville and throughout Yadkin County. Owner on the machine, laser at every corner, and a pad the erectors can lay out on the day they arrive.
Drive access matters on Yadkin County shop sites. If the drive comes in uphill of the pad, we cut a swale or set a culvert so runoff doesn't ride the drive straight into the Yadkinville building. If it comes in downhill, we grade the approach so trailers can back in without dragging.



Yadkinville ground conditions and how they shape pole barn pads
Yadkinville sits in the center of Yadkin County on gently rolling Cecil, Pacolet and Fairview soils — some of the most forgiving ground we work. It drains, it holds a machine, and it doesn't have the Triassic headaches of the eastern counties. Deep Creek, Forbush Creek and the South Deep Creek drain toward the Yadkin River, which forms the county's east and north boundaries. This is old tobacco country, and the thousands of acres that came out of tobacco since the buyout have gone one of three ways: cattle, grapes, or loblolly and sweetgum with a honeysuckle floor.
Around the Yadkin River, US-421 and Courtney, the properties we're usually called to look like this:
- Former tobacco farms along US-421 being split into ten- to twenty-acre homesteads with pads, drives and pasture to clear
- Pole barn and equipment shed pads on working farms
- Vineyard sites off US-601 and Shacktown Road needing brush cleared, blocks graded and fence lines opened
What pole barn pads jobs look like around Yadkinville
A typical Yadkinville call for pole barn pads looks like this: Former tobacco farms along US-421 being split into ten- to twenty-acre homesteads with pads, drives and pasture to clear. We've handled that exact situation around Courtney and Yadkinville Community Park more times than we can count.
The other common one is RV and boat storage buildings, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
Neighbors in Boonville, Elkin and Bermuda Run call us for the same work; Yadkinville sits right in the middle of that route.
Why Yadkinville property owners call A&R
We coordinate directly with the building crew in Yadkin County. Corners, elevation, access for their trucks — the pad is where they need it when they need it.
Call or text (336) 392-8138 for a free pad estimate in Yadkinville. Send the building dimensions and we'll come stake it on the ground.
Pole Barn Pads in Yadkinville: questions
Can you build a pad on a hillside?
Yes, and most rural lots around the Triad require it. The pad is cut into the uphill side and filled on the downhill side, with the fill compacted in lifts so the low corner doesn't settle under the slab. Very steep sites may need a retaining wall on the cut side; we'll tell you if yours does.
How big should the pad be for my pole barn?
The building footprint plus working room — usually five to ten feet beyond each wall. That gives the post crew or concrete finishers space, keeps the pad edge from sloughing under the building, and gives roof runoff somewhere to land that isn't the wall line. If a lean-to or a future addition is planned, tell us and we'll size for it.
How far is A&R Land Services from Yadkinville?
We're based in Greensboro, about 55 minutes from Yadkinville. Yadkin County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle pole barn pads near the Yadkin River and US-421?
Yes. We work throughout Yadkinville and the surrounding Yadkin County area, including properties around the Yadkin River, US-421 and Courtney. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a pole barn pads job in Yadkin County?
Small commercial storage and contractor shops is the most common version of it around Yadkinville. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Stone base — included or not, and how deep is the factor that moves the price most on Yadkin County jobs, and we'll walk through it with you on site.