Shop and barn pads are some of our favorite work in Lewisville because the result is simple: a level, dry, solid piece of ground where there was a slope. A&R Land Services is about 45 minutes from Lewisville and ready to build yours.
The acreage around Lewisville where pole barns go up is mostly rolling pasture and woods edge, and the pad usually ends up partly in cut and partly in fill. The Forsyth County clay from the cut makes excellent fill when it's placed in thin lifts and compacted, and that's how we build it.



Lewisville ground conditions and how they shape pole barn pads
Lewisville sits on a broad, gently rolling plateau between Muddy Creek and the Yadkin River, and the soils are the same sandier Wedowee and Pacolet mix you find across western Forsyth, with Cecil on the flatter ridges. The Yadkin side drops off into a wide floodplain of Chewacla and Wehadkee silt that stays wet most of the winter, while the Muddy Creek side is narrower and steeper. Fallow ground here goes to loblolly and Virginia pine with sweetgum, and the old farm edges are tied up in honeysuckle and Japanese stiltgrass.
Around Muddy Creek, Yadkinville Road (US-421) and Yadkin River, the properties we're usually called to look like this:
- Family home sites opened on inherited farm ground, with a perc area cleared and a drive graded
- Five- to twenty-acre horse farms and hay tracts along Shallowford Road and Conrad Road reclaiming pasture and fence lines
- Yadkin River frontage lots needing cleanup, selective clearing and a trail down to the water
What pole barn pads jobs look like around Lewisville
A typical Lewisville call for pole barn pads looks like this: Family home sites opened on inherited farm ground, with a perc area cleared and a drive graded. We've handled that exact situation around Yadkin River and the Vienna community more times than we can count.
The other common one is RV and boat storage buildings, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
Neighbors in Clemmons, Yadkinville and Bermuda Run call us for the same work; Lewisville sits right in the middle of that route.
Why Lewisville property owners call A&R
We build Forsyth County pads in compacted lifts, not one big push. A pole barn slab is big and thin and finds every soft spot; a properly built pad means it doesn't find any.
Send us the footprint and the address in Lewisville. We'll walk the site, look at the slope and drainage, and give you a written price.
Pole Barn Pads in Lewisville: questions
How much does a pole barn pad cost in North Carolina?
Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.
Do you put stone on the pad?
If the building has a gravel floor, yes — a compacted crusher-run base over the clay pad. If a slab is coming, the concrete contractor usually specifies the stone depth under it and we'll place it to their spec. On a pure clay pad with no stone, the first rain turns the floor to mud, so we recommend some base on nearly every one.
How far is A&R Land Services from Lewisville?
We're based in Greensboro, about 45 minutes from Lewisville. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle pole barn pads near Muddy Creek and Yadkinville Road (US-421)?
Yes. We work throughout Lewisville and the surrounding Forsyth County area, including properties around Muddy Creek, Yadkinville Road (US-421) and Yadkin River. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a pole barn pads job in Forsyth County?
Small commercial storage and contractor shops is the most common version of it around Lewisville. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Drainage work and driveway access to the pad is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.