Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Forsyth County · 45 min from Greensboro

Pole Barn Pads for Clemmons & Forsyth County

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

Shop and barn pads are some of our favorite work in Clemmons because the result is simple: a level, dry, solid piece of ground where there was a slope. A&R Land Services is about 45 minutes from Clemmons and ready to build yours.

The acreage around Clemmons where pole barns go up is mostly rolling pasture and woods edge, and the pad usually ends up partly in cut and partly in fill. The Forsyth County clay from the cut makes excellent fill when it's placed in thin lifts and compacted, and that's how we build it.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Clemmons ground conditions and how they shape pole barn pads

The Yadkin floodplain rules and Forsyth County's erosion control program shape how we work here. On the bluffs we mulch rather than scrape and seed every grade the same day, because the sandy clay cuts fast. Down in the bottoms we don't push equipment until summer, and we won't grade anything that changes the flood flow without the owner checking with the county. Sandy ridge ground near Clemmons will carry a machine most of the year, which makes it a good place to schedule winter mulching work.

Around Yadkin River, Hampton Road and Harper Road, the properties we're usually called to look like this:

  • Estate properties toward Tanglewood with steep back lots down to Muddy Creek needing selective clearing and erosion control
  • Inherited farm tracts out Hampton Road and Idols Road being opened up for family home sites
  • Horse properties near the Yadkin needing fence lines cleared and paddocks leveled

What pole barn pads jobs look like around Clemmons

A typical Clemmons call for pole barn pads looks like this: Estate properties toward Tanglewood with steep back lots down to Muddy Creek needing selective clearing and erosion control. We've handled that exact situation around Harper Road and US-158 more times than we can count.

The other common one is Small commercial storage and contractor shops, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

We also cover pole barn pads in Bermuda Run, Winston Salem and Lewisville, so if you've got property in more than one spot we can often batch the work.

Why Clemmons property owners call A&R

We build Forsyth County pads in compacted lifts, not one big push. A pole barn slab is big and thin and finds every soft spot; a properly built pad means it doesn't find any.

Send us the footprint and the address in Clemmons. We'll walk the site, look at the slope and drainage, and give you a written price.

Pole Barn Pads in Clemmons: questions

Should the pad be built before or after the posts are set?

Before. The post crew needs a level, compacted pad to lay out on and auger into. If the building gets a slab, that's poured after the posts and walls are up, and we can come back to set the stone base at that stage. Build the pad first either way.

How big should the pad be for my pole barn?

The building footprint plus working room — usually five to ten feet beyond each wall. That gives the post crew or concrete finishers space, keeps the pad edge from sloughing under the building, and gives roof runoff somewhere to land that isn't the wall line. If a lean-to or a future addition is planned, tell us and we'll size for it.

How far is A&R Land Services from Clemmons?

We're based in Greensboro, about 45 minutes from Clemmons. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near Yadkin River and Hampton Road?

Yes. We work throughout Clemmons and the surrounding Forsyth County area, including properties around Yadkin River, Hampton Road and Harper Road. If you're outside the town limits, send the address and we'll confirm it's in range.

What does pole barn pads typically involve on a Clemmons property?

Metal shop buildings with concrete slabs is the most common version of it around Clemmons. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Stone base — included or not, and how deep is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Clemmons, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate