Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Forsyth County · 45 min from Greensboro

Building Pads in Clemmons, NC

A level, compacted pad your foundation crew can trust.

Building pad work in Clemmons is where we spend a lot of our time, usually working directly with a builder or a metal building dealer. We stake the footprint, strip the organics, build the fill in thin compacted lifts and hand off a pad that's where the plan says it is.

Where a geotech is involved on a Clemmons project, we schedule their density tests between lifts rather than at the end. It's easier to fix a lift that fails than to tear down a finished pad, and it keeps the builder's timeline intact.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Clemmons ground conditions and how they shape building pads

Clemmons sits on the high ground above the Yadkin River, and the soils here lean sandier than the Greensboro side — Wedowee, Rion and Pacolet series over Cecil, which grade cleaner and drain faster but blow out quickly on a bare slope. Muddy Creek runs down the east side of town through Tanglewood Park, and the Yadkin bottoms on the west are broad Chewacla and Wehadkee floodplain that goes under water several times a year. Growth on fallow land here is loblolly, sweetgum and tulip poplar, and the Yadkin bluffs carry some big white oak and hickory worth saving.

Around Lewisville-Clemmons Road, Peace Haven Road and Muddy Creek, the properties we're usually called to look like this:

  • Two- to three-acre wooded infill lots off Harper Road and Peace Haven Road that need clearing and a pad before a custom build
  • Inherited farm tracts out Hampton Road and Idols Road being opened up for family home sites
  • Estate properties toward Tanglewood with steep back lots down to Muddy Creek needing selective clearing and erosion control

What building pads jobs look like around Clemmons

A typical Clemmons call for building pads looks like this: Two- to three-acre wooded infill lots off Harper Road and Peace Haven Road that need clearing and a pad before a custom build. We've handled that exact situation around Muddy Creek and Tanglewood Park more times than we can count.

The other common one is New home sites on crawl space, slab or basement foundations, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

If you're just outside Clemmons — Advance, Lewisville, Mocksville or anywhere between — you're still inside our regular range.

Why Clemmons property owners call A&R

The pad under your Clemmons building is built by the owner. Clark is a veteran and a working firefighter, and he runs the machine, reads the plan and sets the laser himself.

Building in Clemmons? Contact A&R Land Services for a compacted, laser-leveled pad anywhere in Forsyth County.

Building Pads in Clemmons: questions

Can you build a pad on a sloped lot?

That's most of what we do. On a slope the pad is cut into the high side and filled on the low side, with the fill compacted in lifts so the downhill edge doesn't settle. Steep lots sometimes need a retaining wall or an engineered fill section; we'll tell you if yours is one of those before we quote it.

How much does it cost to build a house pad in NC?

The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.

How far is A&R Land Services from Clemmons?

We're based in Greensboro, about 45 minutes from Clemmons. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near Lewisville-Clemmons Road and Peace Haven Road?

Yes. We work throughout Clemmons and the surrounding Forsyth County area, including properties around Lewisville-Clemmons Road, Peace Haven Road and Muddy Creek. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a building pads job in Forsyth County?

Concrete slabs for equipment sheds, carports and patios is the most common version of it around Clemmons. We review the site plan, stake the footprint with working room around it, set a laser benchmark to the finished floor elevation, and work out cut and fill. Stumps, roots, rock or soft subgrade in the footprint is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.

Building Pads in Clemmons, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate