The ground in Winston-Salem is red clay, and red clay makes a great pad or a terrible one depending on who built it. A&R Land Services is about 35 minutes from Winston-Salem, and we build pads the way the material demands: in lifts, at the right moisture, compacted as we go.
The pads we build around Winston-Salem are mostly on the sloped parcels left after the flat ground got developed. That means a cut on the high side and a compacted fill on the low side, and the fill is where the care goes. We place it in six-to-eight-inch layers and track in every one before the next goes down.



Winston-Salem ground conditions and how they shape building pads
The city and Forsyth County both have stormwater and erosion control programs, and anything over an acre of disturbed ground in the city needs a permit and a sediment plan. The hills here make erosion a bigger deal than in Greensboro — a bare Cecil slope on the Salem Creek side will gully in one hard rain. We mulch in place wherever we can, seed every grade the day it's cut, and keep the heavier excavation for the dry months. Kudzu is a seasonal fight; we hit it hard in late summer when the vines are fully leafed and the crowns are easiest to find.
Around Muddy Creek, Wake Forest University and Salem Lake, the properties we're usually called to look like this:
- Industrial and infill parcels on the east and south sides buried in kudzu, privet and volunteer trees that need clearing before resale
- Older neighborhoods where yards have grown up and need to be cleared and the ground leveled and drained
- Salem Creek and Muddy Creek buffer parcels that need selective clearing within stormwater rules
What building pads jobs look like around Winston-Salem
Most of our building pads work in Winston-Salem comes from two directions. First, industrial and infill parcels on the east and south sides buried in kudzu, privet and volunteer trees that need clearing before resale. Second, modular and manufactured home pads.
Both show up regularly along Salem Lake and US-52, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.
We also cover building pads in Rural Hall, Tobaccoville and Kernersville, so if you've got property in more than one spot we can often batch the work.
Why Winston-Salem property owners call A&R
We build Forsyth County pads to the finished floor elevation on the plan, checked with a laser, with corners staked and overbuild for the crew. Builders in Winston-Salem get a pad they can trust without re-shooting it.
We'll walk the Winston-Salem lot with you or your builder, measure the cut and fill, and give you a written price for the pad.
Building Pads in Winston-Salem: questions
How high should a building pad be above grade?
High enough that water runs off it in every direction. A few inches above surrounding grade with a slight crown is typical for a crawl space home; a slab pad gets set a specific depth below finished floor so the stone and concrete land at the right height. Your builder's finished floor elevation is the number we grade to.
Can you build a pad on a sloped lot?
That's most of what we do. On a slope the pad is cut into the high side and filled on the low side, with the fill compacted in lifts so the downhill edge doesn't settle. Steep lots sometimes need a retaining wall or an engineered fill section; we'll tell you if yours is one of those before we quote it.
How far is A&R Land Services from Winston-Salem?
We're based in Greensboro, about 35 minutes from Winston-Salem. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle building pads near Muddy Creek and Wake Forest University?
Yes. We work throughout Winston-Salem and the surrounding Forsyth County area, including properties around Muddy Creek, Wake Forest University and Salem Lake. If you're outside the town limits, send the address and we'll confirm it's in range.
What does building pads typically involve on a Winston-Salem property?
Metal buildings, pole barns, workshops and detached garages is the most common version of it around Winston-Salem. Fill placed in six-to-eight-inch layers and tracked in before the next goes on. Geotech density testing coordinated between lifts if the project requires it. Compaction spec and whether a geotech is testing between lifts is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.