Rough grading in Winston-Salem is heavy, deliberate work. It's where a sloped, cleared lot becomes a site with a pad, a drive and a drainage plan. We're a veteran and fireman owned crew about 35 minutes away in Greensboro, and this stage of a build is one we handle start to finish.
A lot of rough grading we do near Winston-Salem is on lots cleared by somebody else a few years back and then left to sit. Those sites usually have stumps and root mats under the brush that have to come out before the blade can do its job. We bring the root rake and the excavator for that.



Winston-Salem ground conditions and how they shape rough grading
Winston-Salem is bigger and hillier than Greensboro, and the ground is more varied. The core of the city is Cecil and Pacolet clay on steep-sided ridges, with Wedowee and Rion sandier soils on the west side toward the Yadkin. Salem Creek, Muddy Creek, Silas Creek and Mill Creek drain the city, and their bottoms are tight, flood-prone Chewacla ground that stays saturated most of the winter. Second-growth on vacant land is the usual loblolly, sweetgum and tulip poplar with a privet understory, and kudzu has taken over the old rail cuts and highway banks on the east and south sides.
Around Peters Creek Parkway, the Buena Vista and Ardmore neighborhoods and Silas Creek Parkway, the properties we're usually called to look like this:
- Industrial and infill parcels on the east and south sides buried in kudzu, privet and volunteer trees that need clearing before resale
- Older neighborhoods where yards have grown up and need to be cleared and the ground leveled and drained
- Salem Creek and Muddy Creek buffer parcels that need selective clearing within stormwater rules
What rough grading jobs look like around Winston-Salem
One job we see over and over near Silas Creek Parkway: Industrial and infill parcels on the east and south sides buried in kudzu, privet and volunteer trees that need clearing before resale. That's textbook rough grading work, and it's usually a one-mobilization job for us.
Out toward Salem Creek the pattern changes — more Lots that were cleared years ago but never shaped. The approach is the same, the time on site is what moves.
Either way, the first question we ask on a Winston-Salem site walk is what the ground needs to do afterward, because that decides how far we take it.
We also cover rough grading in Kernersville, Rural Hall and Lewisville, so if you've got property in more than one spot we can often batch the work.
Why Winston-Salem property owners call A&R
Our rough grading estimates in Winston-Salem describe the cut, the fill, the compaction approach and whether any material is trucked. You know what you're paying for before the trailer unloads.
A&R Land Services is about 35 minutes from Winston-Salem. Contact us for cut and fill, pad shaping and earth work anywhere in Forsyth County.
Rough Grading in Winston-Salem: questions
How much does rough grading cost for a house lot?
The honest answer is that it's driven by how many yards of dirt have to move and whether any of it comes in on a truck. A fairly flat lot that just needs shaping and a pad roughed in is a day or two with one machine. A sloped lot that needs a deep cut on one side and a tall fill on the other, with fill delivered, is a bigger number. We give a written estimate after walking it, and we try to balance cut and fill on site to keep trucking out of it.
How far out from Greensboro do you travel for grading?
About an hour and twenty minutes in any direction — the full Triad, up to Virginia, out to Mount Airy and Elkin, down to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Bigger rough grading jobs make the longer drives worthwhile.
How far is A&R Land Services from Winston-Salem?
We're based in Greensboro, about 35 minutes from Winston-Salem. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle rough grading near Peters Creek Parkway and the Buena Vista and Ardmore neighborhoods?
Yes. We work throughout Winston-Salem and the surrounding Forsyth County area, including properties around Peters Creek Parkway, the Buena Vista and Ardmore neighborhoods and Silas Creek Parkway. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a rough grading job in Forsyth County?
Pond banks, berms and earth shaping for privacy or screening is the most common version of it around Winston-Salem. Swales, crowns and positive fall shaped in. We leave the site a few inches high for final grading and walk it with you or your builder. Cubic yards of cut and fill — the single biggest factor is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.