The ground in Kernersville is red clay, and red clay makes a great pad or a terrible one depending on who built it. A&R Land Services is about 20 minutes from Kernersville, and we build pads the way the material demands: in lifts, at the right moisture, compacted as we go.
The pads we build around Kernersville are mostly on the sloped parcels left after the flat ground got developed. That means a cut on the high side and a compacted fill on the low side, and the fill is where the care goes. We place it in six-to-eight-inch layers and track in every one before the next goes down.



Kernersville ground conditions and how they shape building pads
Forsyth County's erosion control office covers anything over an acre of disturbance, and the Abbotts Creek side falls under High Point's water supply watershed rules, so we keep buffers and leave mulch on the creek slopes. The ridge clay carries a track machine most of the year; the creek bottoms we hold for July through November. Storm damage is a regular call here — the subdivisions were built in loblolly stands, and summer windstorms drop pines across yards and fence lines every year.
Around Abbotts Creek, Kernersville Lake and Main Street, the properties we're usually called to look like this:
- Creek-side parcels along Abbotts Creek inside the High Point watershed needing selective, buffer-friendly clearing
- Twenty-acre farm remnants toward Wallburg and Colfax reclaiming pasture and fence lines
- Subdivision yards with storm-dropped pines and leaning sweetgum that need cleanup and clearing
What building pads jobs look like around Kernersville
Most of our building pads work in Kernersville comes from two directions. First, creek-side parcels along Abbotts Creek inside the High Point watershed needing selective, buffer-friendly clearing. Second, concrete slabs for equipment sheds, carports and patios.
Both show up regularly along Main Street and Salem Parkway, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.
Walkertown, Oak Ridge and Winston Salem are in the same loop as Kernersville for us — same crew, same pricing basis.
Why Kernersville property owners call A&R
We build Forsyth County pads to the finished floor elevation on the plan, checked with a laser, with corners staked and overbuild for the crew. Builders in Kernersville get a pad they can trust without re-shooting it.
We'll walk the Kernersville lot with you or your builder, measure the cut and fill, and give you a written price for the pad.
Building Pads in Kernersville: questions
Do building pads need to be compacted?
Yes, and it's the whole point. Loose clay settles for years, and anything built on it moves with it. We place fill in thin lifts and compact each one with the machine as it goes down. For slabs, steel buildings and anything with an engineered foundation, your builder may require tested density, and we work to the geotech's spec and coordinate their inspections.
Do you need a permit to build a pad?
The pad itself usually falls under your building permit, which the builder or the owner pulls through the county inspections office. If the total disturbed area on the lot goes over an acre, a state sediment and erosion control plan is required too. We'll help you figure out which applies before we start.
How far is A&R Land Services from Kernersville?
We're based in Greensboro, about 20 minutes from Kernersville. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle building pads near Abbotts Creek and Kernersville Lake?
Yes. We work throughout Kernersville and the surrounding Forsyth County area, including properties around Abbotts Creek, Kernersville Lake and Main Street. If you're outside the town limits, send the address and we'll confirm it's in range.
What does building pads typically involve on a Kernersville property?
Sloped lots that need a cut-and-fill pad to hold a level floor is the most common version of it around Kernersville. Fill placed in six-to-eight-inch layers and tracked in before the next goes on. Geotech density testing coordinated between lifts if the project requires it. Pad size and how much overbuild the foundation crew needs is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.