If you're building in Colfax and the lot has been cleared, the pad is the next step. We're about 15 minutes away in Greensboro, and we build pads to the builder's finished floor elevation with the fill compacted properly, because loose Guilford County clay is the main reason foundations here move.
Metal building and pole barn pads are a steady part of our Colfax work. Those slabs are big and thin, which makes them sensitive to settlement, so the pad under them has to be uniformly compacted edge to edge. We build them with the overbuild the slab crew needs and check them with a laser.



Colfax ground conditions and how they shape building pads
Colfax sits between the airport and Kernersville along I-40 and US-421, and the land here is caught between two worlds — big airport-related industrial development on one side and old farm ground on the other. Soils are mostly Cecil and Appling red clay with some Wedowee on the higher ridges, and the Deep River headwaters along with Horsepen Creek cut shallow bottoms through it. Where the ground has been left alone it's loblolly and Virginia pine over sweetgum and privet, and the old road frontage is lined with Bradford pear that has escaped from the subdivisions.
Around Bunker Hill Road, Colfax Elementary and Sandy Ridge Road, the properties we're usually called to look like this:
- Wooded residential lots in the Sandy Ridge and Old Mill Road areas needing privet and pine cleared and a shop pad built
- Driveways off busy county roads that wash out and need regrading with proper drainage
- Small farms behind the neighborhoods that have lost field edges to sweetgum and Bradford pear
What building pads jobs look like around Colfax
One job we see over and over near Sandy Ridge Road: Wooded residential lots in the Sandy Ridge and Old Mill Road areas needing privet and pine cleared and a shop pad built. That's textbook building pads work, and it's usually a one-mobilization job for us.
Out toward Old Mill Road the pattern changes — more Additions where the new footprint sits on unprepared ground. The approach is the same, the time on site is what moves.
Either way, the first question we ask on a Colfax site walk is what the ground needs to do afterward, because that decides how far we take it.
We also cover building pads in Oak Ridge, High Point and Greensboro, so if you've got property in more than one spot we can often batch the work.
Why Colfax property owners call A&R
We'll tell you up front whether your Colfax pad needs engineered fill and geotech testing. We're not a general contractor or an engineer; we're the dirt crew, and we'd rather set you up right than have you find out later.
A&R Land Services is about 15 minutes from Colfax. Reach out and we'll get your Guilford County pad built before the footings are due.
Building Pads in Colfax: questions
How high should a building pad be above grade?
High enough that water runs off it in every direction. A few inches above surrounding grade with a slight crown is typical for a crawl space home; a slab pad gets set a specific depth below finished floor so the stone and concrete land at the right height. Your builder's finished floor elevation is the number we grade to.
Can you build a pad on a sloped lot?
That's most of what we do. On a slope the pad is cut into the high side and filled on the low side, with the fill compacted in lifts so the downhill edge doesn't settle. Steep lots sometimes need a retaining wall or an engineered fill section; we'll tell you if yours is one of those before we quote it.
How far is A&R Land Services from Colfax?
We're based in Greensboro, about 15 minutes from Colfax. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle building pads near Bunker Hill Road and Colfax Elementary?
Yes. We work throughout Colfax and the surrounding Guilford County area, including properties around Bunker Hill Road, Colfax Elementary and Sandy Ridge Road. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a building pads job in Guilford County?
Modular and manufactured home pads is the most common version of it around Colfax. We walk it with your builder or foundation crew, confirm the corners and elevation, and leave it ready for footings or slab prep. Whether fill balances on site or has to be delivered is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.