Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Davie County · 45 min from Greensboro

Pole Barn Pads in Bermuda Run, NC

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

A&R Land Services is a veteran and fireman owned crew preparing pole barn and shop pads in Bermuda Run and throughout Davie County. Owner on the machine, laser at every corner, and a pad the erectors can lay out on the day they arrive.

Drive access matters on Davie County shop sites. If the drive comes in uphill of the pad, we cut a swale or set a culvert so runoff doesn't ride the drive straight into the Bermuda Run building. If it comes in downhill, we grade the approach so trailers can back in without dragging.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Bermuda Run ground conditions and how they shape pole barn pads

Bermuda Run is the first exit past the Yadkin on I-40 heading west, and it's a town of golf course lots and newer estate neighborhoods rather than farmland. The ground is Cecil and Pacolet red clay over granite gneiss with a thin band of Chewacla floodplain along the Yadkin River where the town's eastern edge meets the water. Undeveloped lots inside the gates have been sitting in hardwoods for forty years with a privet, honeysuckle and English ivy understory that gets denser every season. Along US-158 the leftover parcels are old pasture gone to Virginia pine and sweetgum.

Around US-158, WinMock at Kinderton and Hillsdale, the properties we're usually called to look like this:

  • Backyard reclamation projects — a half-acre of privet, ivy and sweetgum behind a house turned into lawn
  • Golf-course and estate lots inside Bermuda Run wanting understory mulched and hardwoods preserved for a park-like look
  • Small commercial parcels around Kinderton Village needing rough grading and debris removal

What pole barn pads jobs look like around Bermuda Run

Most of our pole barn pads work in Bermuda Run comes from two directions. First, backyard reclamation projects — a half-acre of privet, ivy and sweetgum behind a house turned into lawn. Second, rV and boat storage buildings.

Both show up regularly along Hillsdale and Tanglewood Park (across the river), and both are jobs we can usually walk, quote and schedule inside a couple of weeks.

Neighbors in Advance, Clemmons and Lewisville call us for the same work; Bermuda Run sits right in the middle of that route.

Why Bermuda Run property owners call A&R

We coordinate directly with the building crew in Davie County. Corners, elevation, access for their trucks — the pad is where they need it when they need it.

Call or text (336) 392-8138 for a free pad estimate in Bermuda Run. Send the building dimensions and we'll come stake it on the ground.

Pole Barn Pads in Bermuda Run: questions

How much does a pole barn pad cost in North Carolina?

Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.

How big should the pad be for my pole barn?

The building footprint plus working room — usually five to ten feet beyond each wall. That gives the post crew or concrete finishers space, keeps the pad edge from sloughing under the building, and gives roof runoff somewhere to land that isn't the wall line. If a lean-to or a future addition is planned, tell us and we'll size for it.

How far is A&R Land Services from Bermuda Run?

We're based in Greensboro, about 45 minutes from Bermuda Run. Davie County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near US-158 and WinMock at Kinderton?

Yes. We work throughout Bermuda Run and the surrounding Davie County area, including properties around US-158, WinMock at Kinderton and Hillsdale. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a pole barn pads job in Davie County?

Small commercial storage and contractor shops is the most common version of it around Bermuda Run. Topsoil and organics off the footprint, high side cut, low side filled in compacted lifts. Slab pads compacted hard and left at the right depth below finish. Whether fill balances on site or is trucked in is the factor that moves the price most on Davie County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Bermuda Run, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate