Shop and barn pads are some of our favorite work in Elon because the result is simple: a level, dry, solid piece of ground where there was a slope. A&R Land Services is about 22 minutes from Elon and ready to build yours.
The acreage around Elon where pole barns go up is mostly rolling pasture and woods edge, and the pad usually ends up partly in cut and partly in fill. The Alamance County clay from the cut makes excellent fill when it's placed in thin lifts and compacted, and that's how we build it.



Elon ground conditions and how they shape pole barn pads
The Haw River corridor and the Lake Burlington and Lake Cammack watersheds carry buffer and impervious-surface rules, so we keep mulch on the slopes and stay off the stream banks. Alamance County erosion control permits apply past an acre outside the town limits. Cecil ground here is reliable most of the year; the Enon pockets near Travis Creek need a dry spell before we grade them. Storm cleanup is common after summer thunderstorms drop pines in the neighborhoods west of campus.
Around Haw River, Shallowford Church Road and Lake Burlington, the properties we're usually called to look like this:
- Infill and rental-property lots near campus that need brush cleared and the ground leveled before sale or construction
- One- to two-acre build lots off Shallowford Church Road, Williamson Avenue and NC-100 with pine and privet to clear
- Haw River frontage lots inside the watershed buffers needing selective clearing
What pole barn pads jobs look like around Elon
A typical Elon call for pole barn pads looks like this: Infill and rental-property lots near campus that need brush cleared and the ground leveled before sale or construction. We've handled that exact situation around Lake Burlington and NC-100 more times than we can count.
The other common one is Small commercial storage and contractor shops, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
Neighbors in Graham, Haw River and Gibsonville call us for the same work; Elon sits right in the middle of that route.
Why Elon property owners call A&R
We build Alamance County pads in compacted lifts, not one big push. A pole barn slab is big and thin and finds every soft spot; a properly built pad means it doesn't find any.
Send us the footprint and the address in Elon. We'll walk the site, look at the slope and drainage, and give you a written price.
Pole Barn Pads in Elon: questions
How much does a pole barn pad cost in North Carolina?
Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.
Do you put stone on the pad?
If the building has a gravel floor, yes — a compacted crusher-run base over the clay pad. If a slab is coming, the concrete contractor usually specifies the stone depth under it and we'll place it to their spec. On a pure clay pad with no stone, the first rain turns the floor to mud, so we recommend some base on nearly every one.
How far is A&R Land Services from Elon?
We're based in Greensboro, about 22 minutes from Elon. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle pole barn pads near Haw River and Shallowford Church Road?
Yes. We work throughout Elon and the surrounding Alamance County area, including properties around Haw River, Shallowford Church Road and Lake Burlington. If you're outside the town limits, send the address and we'll confirm it's in range.
What does pole barn pads typically involve on a Elon property?
Metal shop buildings with concrete slabs is the most common version of it around Elon. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Ground conditions and season is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.