Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Guilford County · 18 min from Greensboro

Pole Barn Pads for Whitsett & Guilford County

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

Rural ground around Whitsett is rarely flat, so most shop pads here are a cut on one side and a compacted fill on the other. We build them that way across Guilford County and we know how to keep the low corner from settling under the slab.

Metal building dealers serving Whitsett typically send a footprint and a date. We work from their drawings, stake the overbuild, and have the Guilford County pad finished and laser-checked before the erection crew rolls in.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Whitsett ground conditions and how they shape pole barn pads

Rock Creek and Big Alamance Creek both drain to the Haw River and on to Jordan Lake, so stream buffer rules apply on the creek-side parcels, and we keep disturbed ground well back from the banks. The Iredell clay on the flats is the main challenge — it's miserable to grade wet and cracks wide open in a drought — so we watch the forecast and plan the fine grading for dry stretches. Mulching, by contrast, we can do nearly year-round on the firmer Cecil ground along NC-61.

Around NC-61, Rock Creek Dairy Road and Rock Creek, the properties we're usually called to look like this:

  • Creek-side parcels along Rock Creek and Big Alamance Creek where buffers limit what can be scraped
  • Old farm fence rows choked with honeysuckle and wild rose that owners want cut back to run new fence
  • Flat Iredell clay fields needing swales and ditching so they'll carry equipment

What pole barn pads jobs look like around Whitsett

A typical Whitsett call for pole barn pads looks like this: Creek-side parcels along Rock Creek and Big Alamance Creek where buffers limit what can be scraped. We've handled that exact situation around Rock Creek and Big Alamance Creek more times than we can count.

The other common one is Small commercial storage and contractor shops, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

We also cover pole barn pads in Mcleansville, Elon and Burlington, so if you've got property in more than one spot we can often batch the work.

Why Whitsett property owners call A&R

Your Whitsett pad is built by the owner. Clark is a veteran and a working firefighter, and he's on the machine from stripping the topsoil to the final laser check.

Building a shop or barn in Whitsett? Contact A&R Land Services and we'll have the Guilford County pad ready before the crew arrives.

Pole Barn Pads in Whitsett: questions

How much does a pole barn pad cost in North Carolina?

Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.

Should the pad be built before or after the posts are set?

Before. The post crew needs a level, compacted pad to lay out on and auger into. If the building gets a slab, that's poured after the posts and walls are up, and we can come back to set the stone base at that stage. Build the pad first either way.

How far is A&R Land Services from Whitsett?

We're based in Greensboro, about 18 minutes from Whitsett. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near NC-61 and Rock Creek Dairy Road?

Yes. We work throughout Whitsett and the surrounding Guilford County area, including properties around NC-61, Rock Creek Dairy Road and Rock Creek. If you're outside the town limits, send the address and we'll confirm it's in range.

What does pole barn pads typically involve on a Whitsett property?

Metal shop buildings with concrete slabs is the most common version of it around Whitsett. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Whether fill balances on site or is trucked in is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Whitsett, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate