Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Randolph County · 40 min from Greensboro

Rough Grading in Franklinville, NC

The heavy cut-and-fill that gives a site its shape before anything gets built on it.

Rough grading sets the bones of a Franklinville property. Get it wrong and every trade after you fights it — footings, slabs, drives, the lawn. We're about 40 minutes from Franklinville, and we grade it right the first time so nobody has to come back.

The ground around Franklinville is rolling Piedmont, so most lots have a high side and a low side and a natural drainage line between them. Rough grading here is usually a matter of cutting the upper side, filling the lower, and making sure the pad sits above the wet end. We read that on the walk-through before any stakes go in.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Franklinville ground conditions and how they shape rough grading

Franklinville sits on the Deep River between Cedar Falls and Ramseur, and Faith Rock is a good reminder of what the ground is made of here: hard metavolcanic slate with a thin skin of Georgeville and Badin silt loam on top. The river bluffs are steep and the flats above them are old cotton-mill farmland on Cid, Herndon and Nanford soils. Sandy Creek runs in from the northeast. Between the river and US-64 the land is a patchwork of pasture, poultry houses and pine stands, and the pine is loblolly and shortleaf with sweetgum and privet filling every gap along the branches.

Around NC-22, the Deep River Rail Trail and Franklinville Road, the properties we're usually called to look like this:

  • Farms on Sandy Creek Road and the Cedar Falls side needing fence lines, pasture reclamation and pole barn or poultry house pads
  • Old mill-village lots in town that come up for sale under decades of sweetgum and privet
  • Hunting tracts between Franklinville and Ramseur needing lanes cut and old logging roads reopened

What rough grading jobs look like around Franklinville

One job we see over and over near Franklinville Road: Farms on Sandy Creek Road and the Cedar Falls side needing fence lines, pasture reclamation and pole barn or poultry house pads. That's textbook rough grading work, and it's usually a one-mobilization job for us.

Out toward Andrew Hunter Road the pattern changes — more Lots that were cleared years ago but never shaped. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Franklinville site walk is what the ground needs to do afterward, because that decides how far we take it.

Neighbors in Climax, Ramseur and Staley call us for the same work; Franklinville sits right in the middle of that route.

Why Franklinville property owners call A&R

Laser-checked elevations on every Randolph County rough grade. Builders in Franklinville appreciate handing a site to their foundation crew that's where the plan says it is, not somewhere in the neighborhood.

Send us your site plan and the address of the Franklinville lot. We'll come walk it and give you a written price for the dirt work.

Rough Grading in Franklinville: questions

Do you compact the fill?

Yes, and it's the part people don't see that matters most. Clay fill goes down in thin lifts and gets tracked in with the machine as each one is placed. Anything that will carry a slab, footing or driveway gets extra passes. For engineered fill that needs a tested density, we work to the geotech's spec and coordinate with their inspector.

How far out from Greensboro do you travel for grading?

About an hour and twenty minutes in any direction — the full Triad, up to Virginia, out to Mount Airy and Elkin, down to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Bigger rough grading jobs make the longer drives worthwhile.

How far is A&R Land Services from Franklinville?

We're based in Greensboro, about 40 minutes from Franklinville. Randolph County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle rough grading near NC-22 and the Deep River Rail Trail?

Yes. We work throughout Franklinville and the surrounding Randolph County area, including properties around NC-22, the Deep River Rail Trail and Franklinville Road. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a rough grading job in Randolph County?

Pond banks, berms and earth shaping for privacy or screening is the most common version of it around Franklinville. Swales, crowns and positive fall shaped in. We leave the site a few inches high for final grading and walk it with you or your builder. Compaction requirements for pads and structural fill is the factor that moves the price most on Randolph County jobs, and we'll walk through it with you on site.

Rough Grading in Franklinville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate