Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Stokes County · 40 min from Greensboro

Pole Barn Pads in Germanton, NC

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

Shop and barn pads are some of our favorite work in Germanton because the result is simple: a level, dry, solid piece of ground where there was a slope. A&R Land Services is about 40 minutes from Germanton and ready to build yours.

The acreage around Germanton where pole barns go up is mostly rolling pasture and woods edge, and the pad usually ends up partly in cut and partly in fill. The Stokes County clay from the cut makes excellent fill when it's placed in thin lifts and compacted, and that's how we build it.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Germanton ground conditions and how they shape pole barn pads

Germanton straddles the Stokes–Forsyth line on NC-8 between Rural Hall and Walnut Cove, and the ground changes right there. South of the line it is Forsyth County red clay — Cecil, Pacolet and Appling on the ridges — and north of it you cross into the edge of the Dan River Triassic basin where Mayodan and Pinkston sandy loam show up. Buffalo Creek and the upper branches of Town Fork Creek drain the area toward the Dan, and Belews Lake is a few miles east. The old tobacco farms along Germanton Road and NC-65 have been idle long enough to carry mature Virginia pine, and the pasture that was left has cedar and honeysuckle moving in.

Around the Stokes–Forsyth county line, Buffalo Creek and Flint Hill Road, the properties we're usually called to look like this:

  • Cattle farms on Buffalo Creek and toward Dalton needing pasture reclaimed and fence rows pushed back
  • Collapsed tobacco barns and old farmhouses that need small demolition before the land is reused
  • Two to ten acre commuter home sites along NC-8, Flint Hill Road and the Belews Creek side needing understory cleared, a pad and a driveway

What pole barn pads jobs look like around Germanton

One job we see over and over near Flint Hill Road: Cattle farms on Buffalo Creek and toward Dalton needing pasture reclaimed and fence rows pushed back. That's textbook pole barn pads work, and it's usually a one-mobilization job for us.

Out toward Germanton Art Gallery crossroads the pattern changes — more Post-frame pole barns for equipment, hay or livestock. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Germanton site walk is what the ground needs to do afterward, because that decides how far we take it.

Walnut Cove, Walkertown and Winston Salem are in the same loop as Germanton for us — same crew, same pricing basis.

Why Germanton property owners call A&R

We build Stokes County pads in compacted lifts, not one big push. A pole barn slab is big and thin and finds every soft spot; a properly built pad means it doesn't find any.

Send us the footprint and the address in Germanton. We'll walk the site, look at the slope and drainage, and give you a written price.

Pole Barn Pads in Germanton: questions

Do you put stone on the pad?

If the building has a gravel floor, yes — a compacted crusher-run base over the clay pad. If a slab is coming, the concrete contractor usually specifies the stone depth under it and we'll place it to their spec. On a pure clay pad with no stone, the first rain turns the floor to mud, so we recommend some base on nearly every one.

How much does a pole barn pad cost in North Carolina?

Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.

How far is A&R Land Services from Germanton?

We're based in Greensboro, about 40 minutes from Germanton. Stokes County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near the Stokes–Forsyth county line and Buffalo Creek?

Yes. We work throughout Germanton and the surrounding Stokes County area, including properties around the Stokes–Forsyth county line, Buffalo Creek and Flint Hill Road. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a pole barn pads job in Stokes County?

Detached garages and carports is the most common version of it around Germanton. Walk-through with you or the building crew, corners and elevation confirmed, pad ready for posts or concrete. Drainage work and driveway access to the pad is the factor that moves the price most on Stokes County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Germanton, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate