Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Stokes County · 45 min from Greensboro

King Pole Barn Pads

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

If your building kit is on order and the site in King isn't ready, we're about 45 minutes away in Greensboro and this is work we do every week. Pads for post-frame barns, metal shops, garages and storage buildings, built to your supplier's footprint.

Many King buildings go up with a gravel floor first and a slab a year or two later. We build the pad with that in mind — compacted hard, crusher-run base on top — so the concrete contractor has a ready base when the budget allows.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

King ground conditions and how they shape pole barn pads

King has been the Winston-Salem commuter town for a generation, so we do a lot of home-site clearing on one to five acre wooded lots along NC-66, Moores Springs Road and Kirby Road, plus subdivision site work off US-52. Then there is the older farm side: cattle operations on Spainhour Mill Road and toward Rural Hall with pasture gone to cedar and fence lines that need finding, and tobacco farms that have stood idle long enough to carry a mature pine stand. Mountain-foot parcels toward Sauratown attract cabin buyers who want trails and selective clearing rather than a clean cut.

Around Kirby Road, NC-8 and Main Street, the properties we're usually called to look like this:

  • One to five acre wooded commuter home sites along NC-66, Moores Springs Road and Kirby Road
  • Mountain-foot cabin parcels toward Sauratown where owners want trails and selective clearing
  • Cattle farms on Spainhour Mill Road and toward Rural Hall with pasture gone to cedar and fence lines lost

What pole barn pads jobs look like around King

A typical King call for pole barn pads looks like this: One to five acre wooded commuter home sites along NC-66, Moores Springs Road and Kirby Road. We've handled that exact situation around Main Street and Town Fork Creek more times than we can count.

The other common one is Horse barns and run-in sheds, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

Tobaccoville, Rural Hall and Winston Salem are in the same loop as King for us — same crew, same pricing basis.

Why King property owners call A&R

Our King pad estimates tell you the overbuild, the fill, the stone and the drainage work. If you want to add the driveway or clear more of the lot, it's itemized so you can see the cost.

A&R Land Services builds pads across Stokes County from Greensboro. Reach out about your King building.

Pole Barn Pads in King: questions

What areas do you build pads in?

Greensboro and all of the Triad, plus roughly an hour and twenty minutes out — Reidsville, Eden, Mount Airy, Elkin, Lexington, Salisbury, Albemarle, Asheboro, Sanford, Burlington, Durham, Chapel Hill and Raleigh.

Do you put stone on the pad?

If the building has a gravel floor, yes — a compacted crusher-run base over the clay pad. If a slab is coming, the concrete contractor usually specifies the stone depth under it and we'll place it to their spec. On a pure clay pad with no stone, the first rain turns the floor to mud, so we recommend some base on nearly every one.

How far is A&R Land Services from King?

We're based in Greensboro, about 45 minutes from King. Stokes County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near Kirby Road and NC-8?

Yes. We work throughout King and the surrounding Stokes County area, including properties around Kirby Road, NC-8 and Main Street. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach pole barn pads on King ground?

Post-frame pole barns for equipment, hay or livestock is the most common version of it around King. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Building footprint and overbuild size is the factor that moves the price most on Stokes County jobs, and we'll walk through it with you on site.

Pole Barn Pads in King, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate