If the city sent a letter about your Graham lot or the back field got away from you this summer, we'll knock it down. Veteran and fireman owned, based in Greensboro, and bush hogging in Alamance County is the fastest-scheduling work we do.
Pasture edges in Alamance County — along the creek, under the tree line, around the pond — are where the tractor stops and the brush starts. On Graham farms we mow those strips with the track machine so the pasture stays the size it was fenced to be.



Graham ground conditions and how they shape bush hogging
The Iredell and Enon clays are the challenge — they rut, they slick, and they shrink and crack in a dry spell. We grade them only after a dry stretch and use track machines. The Graham-Mebane Lake watershed overlay limits impervious cover and puts buffers on Back Creek and its branches. Alamance County erosion control handles disturbance past an acre. Drainage is part of nearly every job here: swales, ditch cleaning and French drains to get standing water off the flat clay and moving.
Around Court Square, Haw River and Big Alamance Creek, the properties we're usually called to look like this:
- Twenty- to eighty-acre cattle and hay farms off NC-87, NC-49 and Swepsonville Road reclaiming pasture from cedar and privet
- Subdivision lots and small commercial sites along the I-40/I-85 and Graham-Hopedale corridor
- Fence-row and hedgerow clearing on old farms where the wire has disappeared into honeysuckle
What bush hogging jobs look like around Graham
If you're near Big Alamance Creek or NC-49, odds are your situation is one we've already worked: twenty- to eighty-acre cattle and hay farms off NC-87, NC-49 and Swepsonville Road reclaiming pasture from cedar and privet, or hay fields and pasture that missed a cutting.
The bush hogging approach for Alamance County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.
If you're just outside Graham — Burlington, Gibsonville, Saxapahaw or anywhere between — you're still inside our regular range.
Why Graham property owners call A&R
The track machine mows ground in Graham that a tractor-mounted hog can't — steep banks, soft bottoms, tight corners around buildings. You get the whole field cut, not just the part the tractor could reach.
Field mowing in Alamance County is easiest on a schedule. Get in touch and we'll set up spring and late-summer cuts.
Bush Hogging in Graham: questions
What's the difference between bush hogging and forestry mulching?
The cutter handles grass, weeds, briars and saplings up to two or three inches, and leaves the material chopped on the ground. The mulcher grinds brush and trees up to eight or ten inches into chips. If your field has been let go long enough that the saplings are thicker than your thumb, it's a mulching job, and we'll tell you that rather than tear up the cutter.
Can you mow a lot that got a code violation notice?
Yes, and that's a common call. Greensboro, High Point, Burlington and most Triad towns enforce overgrowth ordinances on vacant lots. We can usually get a lot mowed within a few days of the call, and we'll leave the edges clean enough that the inspector signs off.
How far is A&R Land Services from Graham?
We're based in Greensboro, about 30 minutes from Graham. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle bush hogging near Court Square and Haw River?
Yes. We work throughout Graham and the surrounding Alamance County area, including properties around Court Square, Haw River and Big Alamance Creek. If you're outside the town limits, send the address and we'll confirm it's in range.
What does bush hogging typically involve on a Graham property?
Back acreage on rural homesites that's getting away is the most common version of it around Graham. Perimeter and fence lines first, then the interior in passes, working tight around buildings and under limbs. Obstacles found during the walk get flagged and mowed around. Saplings and briars versus plain grass and weeds is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.