Ditch cleaning in Graham is one of the cheapest drainage fixes there is, and one of the most put off. We bring a mini excavator and a blade from Greensboro, pull the silt and brush, restore the fall to the outlet and leave the ditch carrying water the way it did when it was dug.
Subdivisions around Graham were built with drainage swales between lots that nobody maintains. When they fill in, backyards flood. We reshape those swales to a gentle, mowable profile with a defined low line so they carry water again in a Alamance County thunderstorm.



Graham ground conditions and how they shape ditch cleaning
The Iredell and Enon clays are the challenge — they rut, they slick, and they shrink and crack in a dry spell. We grade them only after a dry stretch and use track machines. The Graham-Mebane Lake watershed overlay limits impervious cover and puts buffers on Back Creek and its branches. Alamance County erosion control handles disturbance past an acre. Drainage is part of nearly every job here: swales, ditch cleaning and French drains to get standing water off the flat clay and moving.
Around Big Alamance Creek, NC-87 and Graham-Mebane Lake, the properties we're usually called to look like this:
- Twenty- to eighty-acre cattle and hay farms off NC-87, NC-49 and Swepsonville Road reclaiming pasture from cedar and privet
- Subdivision lots and small commercial sites along the I-40/I-85 and Graham-Hopedale corridor
- Fence-row and hedgerow clearing on old farms where the wire has disappeared into honeysuckle
What ditch cleaning jobs look like around Graham
Most of our ditch cleaning work in Graham comes from two directions. First, twenty- to eighty-acre cattle and hay farms off NC-87, NC-49 and Swepsonville Road reclaiming pasture from cedar and privet. Second, channels that carry water across a property to a creek or pond.
Both show up regularly along Graham-Mebane Lake and Alamance Community College, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.
If you're just outside Graham — Snow Camp, Saxapahaw, Gibsonville or anywhere between — you're still inside our regular range.
Why Graham property owners call A&R
If the ditch is part of a bigger drainage or driveway problem on your Graham property, we handle the whole thing from Greensboro — ditch, culvert, driveway regrade, erosion fix. One estimate, one mobilization.
Water backing up in the ditch along your Graham drive? Call or text (336) 392-8138 for a free estimate on cleaning and regrading it.
Ditch Cleaning in Graham: questions
Can you clean out a ditch that's grown up in brush and trees?
Yes. That's most of the ditches we see. The mulcher or brush cutter takes the growth off the banks, the grapple pulls anything bigger, and the excavator digs out the roots and silt. Then we reshape the banks and bottom so the water flows again. If the trees are big enough to shade the ditch and keep it from regrowing, we can leave them.
How much does ditch cleaning cost?
It scales with length and how much has to come out. A couple hundred feet of driveway ditch with light silt is a short job. A long farm ditch with two feet of mud, trees on the banks and a buried culvert is a full day or more with haul-off. We price after walking the run and the estimate is free. Stone lining and culvert work are quoted separately so you can see what each piece costs.
How far is A&R Land Services from Graham?
We're based in Greensboro, about 30 minutes from Graham. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle ditch cleaning near Big Alamance Creek and NC-87?
Yes. We work throughout Graham and the surrounding Alamance County area, including properties around Big Alamance Creek, NC-87 and Graham-Mebane Lake. If you're outside the town limits, send the address and we'll confirm it's in range.
What does ditch cleaning typically involve on a Graham property?
Driveway ditches that back water onto the drive is the most common version of it around Graham. Brush and small trees on the banks get mulched or grappled out. The mini excavator removes the silt and debris down to firm ground and re-establishes the bottom grade toward the outlet. Culverts that need cleaning, resetting or replacing in the run is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.