Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Stokes County · 45 min from Greensboro

Trail Cutting for King & Stokes County

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

Wooded land in King is a lot more fun with a trail through it. A&R Land Services cuts walking loops, UTV paths and equipment lanes across Stokes County with a forestry mulcher, leaving a chip floor you can ride the same day. We're about 45 minutes away in Greensboro.

Nearly every trail we cut in Stokes County crosses a creek or a wet-weather branch. On King properties we place the crossing where the bottom's firm, keep the clearing narrow inside the buffer, and set stone or a culvert if you'll be driving it in the wet.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

King ground conditions and how they shape trail cutting

Rock is the main difference from working in Guilford. Quartzite in the Rion and Hiwassee soils means stump grubbing is slow and hard on equipment, so we mulch unless a foundation is going in. The ridges dry quickly and can be worked in winter. Stokes County enforces erosion rules past an acre and the Town Fork Creek corridor has buffers; nothing in King drains to a municipal reservoir, but the creeks run to the Dan and the county does check. Steep mountain-foot slopes get mulched with the root mat left intact.

Around the Forsyth County line, Moores Springs Road and Main Street, the properties we're usually called to look like this:

  • Cattle farms on Spainhour Mill Road and toward Rural Hall with pasture gone to cedar and fence lines lost
  • Idle tobacco farms in mature Virginia pine being opened back up for hay or horses
  • One to five acre wooded commuter home sites along NC-66, Moores Springs Road and Kirby Road

What trail cutting jobs look like around King

Around Main Street, the properties that call us for trail cutting tend to be cattle farms on Spainhour Mill Road and toward Rural Hall with pasture gone to cedar and fence lines lost.

Closer to Pilot Mountain it's more often uTV, ATV and dirt bike trails on recreational land — different layout, same machine, and the estimate reflects the difference honestly.

King isn't one kind of ground, and we don't price it like it is.

If you're just outside King — Tobaccoville, Walnut Cove, Pilot Mountain or anywhere between — you're still inside our regular range.

Why King property owners call A&R

Greensboro to King is about 45 minutes, which keeps a half-day trail job worth doing and makes it easy to come back and add a loop or a spur later.

Send us an aerial with the route sketched in and a couple of photos of the woods. We'll give you a real number for cutting it in King.

Trail Cutting in King: questions

How wide should an ATV or UTV trail be?

Eight feet is the minimum for a side-by-side to pass comfortably, and ten feet gives you room on turns and lets two riders meet. Walking trails are fine at four to six feet. Equipment access for a tractor or truck wants twelve or more. We cut to the use and keep the turns gentle enough for whatever's riding it.

Do you remove the stumps on the trail?

Stumps inside the corridor get mulched to grade — low enough that they won't catch a tire, a hoof or a boot. On stretches where you want bare dirt for gravel we pull them with the excavator. Most trail customers are fine with mulched stumps and a chip floor.

How far is A&R Land Services from King?

We're based in Greensboro, about 45 minutes from King. Stokes County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near the Forsyth County line and Moores Springs Road?

Yes. We work throughout King and the surrounding Stokes County area, including properties around the Forsyth County line, Moores Springs Road and Main Street. If you're outside the town limits, send the address and we'll confirm it's in range.

What does trail cutting typically involve on a King property?

Equipment lanes to back fields, timber and ponds is the most common version of it around King. A written plan with the trail's length and width, where crossings are, any gravel or culvert work included, and the price. Trails are quoted by the job after the walk. Total trail length and width is the factor that moves the price most on Stokes County jobs, and we'll walk through it with you on site.

Trail Cutting in King, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate