Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Forsyth County · 45 min from Greensboro

Trail Cutting for Tobaccoville & Forsyth County

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

Wooded land in Tobaccoville is a lot more fun with a trail through it. A&R Land Services cuts walking loops, UTV paths and equipment lanes across Forsyth County with a forestry mulcher, leaving a chip floor you can ride the same day. We're about 45 minutes away in Greensboro.

Nearly every trail we cut in Forsyth County crosses a creek or a wet-weather branch. On Tobaccoville properties we place the crossing where the bottom's firm, keep the clearing narrow inside the buffer, and set stone or a culvert if you'll be driving it in the wet.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Tobaccoville ground conditions and how they shape trail cutting

Rock is close to the surface on the higher ridges toward the Sauratowns, so we scope grading and trenching jobs with that in mind, and pads out here are often built up with fill rather than cut. Forsyth County's erosion control office handles permits past an acre. The ridge ground will carry a machine almost any month, which makes Tobaccoville good winter work for mulching; the creek bottoms along Muddy Creek and Grassy Creek we leave for summer. Bare sandy slopes need seed and cover the same day they're graded.

Around Reynolds Road, NC-66 and Little Yadkin River, the properties we're usually called to look like this:

  • Ten- to fifty-acre former tobacco farms off Tobaccoville Road and Spainhour Mill Road being brought back into hay and pasture
  • Family home sites on a corner of the home tract with a perc area cleared and a drive graded
  • One- to two-acre subdivision lots on the Rural Hall and Pfafftown sides with pine to clear

What trail cutting jobs look like around Tobaccoville

One job we see over and over near Little Yadkin River: Ten- to fifty-acre former tobacco farms off Tobaccoville Road and Spainhour Mill Road being brought back into hay and pasture. That's textbook trail cutting work, and it's usually a one-mobilization job for us.

Out toward the Pfafftown community (south) the pattern changes — more Equipment lanes to back fields, timber and ponds. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Tobaccoville site walk is what the ground needs to do afterward, because that decides how far we take it.

King, Rural Hall and Winston Salem are in the same loop as Tobaccoville for us — same crew, same pricing basis.

Why Tobaccoville property owners call A&R

Greensboro to Tobaccoville is about 45 minutes, which keeps a half-day trail job worth doing and makes it easy to come back and add a loop or a spur later.

Send us an aerial with the route sketched in and a couple of photos of the woods. We'll give you a real number for cutting it in Tobaccoville.

Trail Cutting in Tobaccoville: questions

How wide should an ATV or UTV trail be?

Eight feet is the minimum for a side-by-side to pass comfortably, and ten feet gives you room on turns and lets two riders meet. Walking trails are fine at four to six feet. Equipment access for a tractor or truck wants twelve or more. We cut to the use and keep the turns gentle enough for whatever's riding it.

How much does it cost to cut a trail through the woods?

Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.

How far is A&R Land Services from Tobaccoville?

We're based in Greensboro, about 45 minutes from Tobaccoville. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near Reynolds Road and NC-66?

Yes. We work throughout Tobaccoville and the surrounding Forsyth County area, including properties around Reynolds Road, NC-66 and Little Yadkin River. If you're outside the town limits, send the address and we'll confirm it's in range.

What does trail cutting typically involve on a Tobaccoville property?

Connecting a house to a creek, pond or picnic spot through the woods is the most common version of it around Tobaccoville. We walk or ride the trail end to end before we leave. If a turn is tight or a stub stands up, it gets fixed on the spot. Slope and how much routing work the terrain needs is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.

Trail Cutting in Tobaccoville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate