Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Drainage & Erosion · Randolph County · 30 min from Greensboro

Liberty Culverts

Driveway pipe sized to the water, set to grade, bedded in stone — no more washed-out entrance.

If the gravel at the end of your Liberty driveway ends up in the road after every storm, the culvert is the problem. We size the pipe to the ditch, set it right and rebuild the crossing so Randolph County weather stops winning that fight.

Around Liberty, a lot of the older culverts are corrugated metal that has rusted through on the bottom. The pipe looks fine from the ends but the water is running under it, and the driveway above is slowly sinking into the void. We pull those and replace them with HDPE or concrete depending on cover and traffic.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Liberty ground conditions and how they shape culverts

Our Liberty work splits between the megasite boom and the farms. Along Old 421 Road, Kimesville Road and NC-49, investors and relocating families are buying wooded tracts of two to fifty acres and need them cleared, graded and roaded, and some of that is commercial clearing for contractor yards and supplier warehouses near the plant. Out toward Staley and Patterson Grove it is still poultry houses, pasture gone to cedar, and fence rows along Sandy Creek Road that need to be found and reopened. The Liberty Antiques Festival grounds and the surrounding farms see a lot of bush-hogging and field-edge clearing every year too.

Around Sandy Creek, Old 421 Road and Kimesville Road, the properties we're usually called to look like this:

  • Poultry and cattle farms toward Staley with pasture gone to cedar and fence rows lost along Sandy Creek Road
  • Older homeplaces along NC-49 and Old Liberty Road being opened for new construction
  • Field edges and festival-ground acreage needing seasonal bush-hogging and brush knockdown

What culverts jobs look like around Liberty

A typical Liberty call for culverts looks like this: Poultry and cattle farms toward Staley with pasture gone to cedar and fence rows lost along Sandy Creek Road. We've handled that exact situation around Kimesville Road and the Greensboro-Randolph Megasite more times than we can count.

The other common one is Culverts buried in silt that need cleaning or resetting, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

We also cover culverts in Staley, Climax and Pleasant Garden, so if you've got property in more than one spot we can often batch the work.

Why Liberty property owners call A&R

Every pipe we set in Randolph County goes on stone bedding, gets backfilled with ABC stone in lifts and compacted, and gets its ends armored. That's more work than dropping a pipe in a trench and covering it with clay, and it's why ours don't settle or wash.

Get the pipe under your Liberty driveway fixed before the next storm takes the gravel with it. A&R is about 30 minutes away and ready to help.

Culverts in Liberty: questions

Why does my driveway wash out at the road every time it rains?

Usually one of three things: the culvert is too small for the ditch, it's set higher than the ditch bottom so water backs up and goes over the drive, or it's silted shut. Sometimes it's all three. A correctly sized pipe set at ditch grade with the ditch cleaned on both sides fixes it, and the gravel stays where it belongs.

What size culvert do I need for my driveway?

It depends on how much water the ditch carries, which depends on the drainage area above it. 15 inches is a common minimum on quiet roads; 18 and 24 inches are common where the ditch drains a larger area. On state roads NCDOT decides. On private property we size to the drainage area with a margin, because an undersized pipe is the most common reason an entrance washes out.

How far is A&R Land Services from Liberty?

We're based in Greensboro, about 30 minutes from Liberty. Randolph County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle culverts near Sandy Creek and Old 421 Road?

Yes. We work throughout Liberty and the surrounding Randolph County area, including properties around Sandy Creek, Old 421 Road and Kimesville Road. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach culverts on Liberty ground?

Crushed, rusted or collapsed driveway pipe replacement is the most common version of it around Liberty. We look at the ditch, estimate the drainage area, check for utilities and figure out whether the road is state-maintained. If it is, we'll walk you through the NCDOT driveway permit and what size pipe they'll require. Ditch cleaning and reshaping needed upstream and downstream is the factor that moves the price most on Randolph County jobs, and we'll walk through it with you on site.

Culverts in Liberty, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate