Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Rockingham County · 35 min from Greensboro

Madison Trail Cutting

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

A side-by-side loop, a path to the deer stand, a lane to the hay field you haven't reached in years — whatever the trail is for on your Madison property, we cut it to that width and that purpose.

The woods around Madison are mostly hardwood slopes with a privet and honeysuckle understory, which cuts cleanly. We route trails along the contour on Rockingham County slopes so they don't gully out after the first wet winter.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Madison ground conditions and how they shape trail cutting

Mayo River State Park has brought a lot of attention to the land along NC-704 and Lindsey Bridge Road, and we have cleared more than a few parcels for people who bought near the park wanting a cabin or a small homestead. The rest of our Madison work runs along US-220 Business and NC-135: older farms with poultry houses and cattle where the back fields have gone to Virginia pine, and river lots on the Dan where the owner wants the understory out and a path down to the water. Ayersville Road and Decatur Street have older in-town lots that come up for sale wooded.

Around the Mayo River, Hickory Street and NC-704, the properties we're usually called to look like this:

  • Cabin and homestead parcels near Mayo River State Park off NC-704 and Lindsey Bridge Road needing understory clearing and a driveway
  • Cattle and poultry farms along NC-135 and US-220 Business with back fields gone to Virginia pine
  • Dan River frontage lots where the goal is a view and a path down to the water without disturbing the bank

What trail cutting jobs look like around Madison

One job we see over and over near NC-704: Cabin and homestead parcels near Mayo River State Park off NC-704 and Lindsey Bridge Road needing understory clearing and a driveway. That's textbook trail cutting work, and it's usually a one-mobilization job for us.

Out toward Ayersville Road the pattern changes — more Fire and emergency access through dense acreage. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Madison site walk is what the ground needs to do afterward, because that decides how far we take it.

If you're just outside Madison — Stoneville, Wentworth, Belews Creek or anywhere between — you're still inside our regular range.

Why Madison property owners call A&R

We flag the route with you before the mulcher starts, so the trail goes where you want it and around the trees you care about. The estimate names the length, width, crossings and any gravel, and the number holds.

For trails, UTV loops and equipment lanes in Madison, call (336) 392-8138. The owner routes it, cuts it and rides it with you.

Trail Cutting in Madison: questions

Do you remove the stumps on the trail?

Stumps inside the corridor get mulched to grade — low enough that they won't catch a tire, a hoof or a boot. On stretches where you want bare dirt for gravel we pull them with the excavator. Most trail customers are fine with mulched stumps and a chip floor.

Can you cut a trail across a creek?

Yes. We pick the crossing where the banks are low and the bottom is firm, keep the clearing narrow inside the buffer, and either set stone for a ford or install a culvert with fill over it, depending on how much water runs and how often you need to cross it in the wet. The excavator and the dump trailer handle it on the same visit.

How far is A&R Land Services from Madison?

We're based in Greensboro, about 35 minutes from Madison. Rockingham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near the Mayo River and Hickory Street?

Yes. We work throughout Madison and the surrounding Rockingham County area, including properties around the Mayo River, Hickory Street and NC-704. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach trail cutting on Madison ground?

UTV, ATV and dirt bike trails on recreational land is the most common version of it around Madison. We walk or ride the trail end to end before we leave. If a turn is tight or a stub stands up, it gets fixed on the spot. Trees on the route that need felling and handling is the factor that moves the price most on Rockingham County jobs, and we'll walk through it with you on site.

Trail Cutting in Madison, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate