Wooded land in Wentworth is a lot more fun with a trail through it. A&R Land Services cuts walking loops, UTV paths and equipment lanes across Rockingham County with a forestry mulcher, leaving a chip floor you can ride the same day. We're about 30 minutes away in Greensboro.
Nearly every trail we cut in Rockingham County crosses a creek or a wet-weather branch. On Wentworth properties we place the crossing where the bottom's firm, keep the clearing narrow inside the buffer, and set stone or a culvert if you'll be driving it in the wet.



Wentworth ground conditions and how they shape trail cutting
Red clay around Wentworth compacts tight and sheds water fast when it is bare, so leaving a mulch layer on the ground after clearing makes a real difference on slopes draining to Hogans Creek. Rockingham County's erosion program kicks in at one acre of disturbance, and septic areas need to be flagged and protected from heavy equipment before we start. Winter mud on the Helena flats is bad enough that we tell customers to expect a spring start on anything low; the ridges can be worked most of the year.
Around NC-65, the Haw River and Wentworth Street, the properties we're usually called to look like this:
- Cattle farms on NC-87 and NC-65 with fence rows, pond banks and field edges grown up in honeysuckle and sweetgum
- Idle fields near the Haw River standing in 20–40 year old pine that owners want converted back to hay
- Old tobacco farms with collapsed barns and pack houses that need small demolition before the land can be used
What trail cutting jobs look like around Wentworth
One job we see over and over near Wentworth Street: Cattle farms on NC-87 and NC-65 with fence rows, pond banks and field edges grown up in honeysuckle and sweetgum. That's textbook trail cutting work, and it's usually a one-mobilization job for us.
Out toward Rock House Road the pattern changes — more Horse trails and riding paths on farm property. The approach is the same, the time on site is what moves.
Either way, the first question we ask on a Wentworth site walk is what the ground needs to do afterward, because that decides how far we take it.
Neighbors in Reidsville, Eden and Summerfield call us for the same work; Wentworth sits right in the middle of that route.
Why Wentworth property owners call A&R
Greensboro to Wentworth is about 30 minutes, which keeps a half-day trail job worth doing and makes it easy to come back and add a loop or a spur later.
Send us an aerial with the route sketched in and a couple of photos of the woods. We'll give you a real number for cutting it in Wentworth.
Trail Cutting in Wentworth: questions
How much does it cost to cut a trail through the woods?
Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.
How wide should an ATV or UTV trail be?
Eight feet is the minimum for a side-by-side to pass comfortably, and ten feet gives you room on turns and lets two riders meet. Walking trails are fine at four to six feet. Equipment access for a tractor or truck wants twelve or more. We cut to the use and keep the turns gentle enough for whatever's riding it.
How far is A&R Land Services from Wentworth?
We're based in Greensboro, about 30 minutes from Wentworth. Rockingham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle trail cutting near NC-65 and the Haw River?
Yes. We work throughout Wentworth and the surrounding Rockingham County area, including properties around NC-65, the Haw River and Wentworth Street. If you're outside the town limits, send the address and we'll confirm it's in range.
What does trail cutting typically involve on a Wentworth property?
Fire and emergency access through dense acreage is the most common version of it around Wentworth. We walk or ride the trail end to end before we leave. If a turn is tight or a stub stands up, it gets fixed on the spot. Creek and wet crossings and whether they get stone or a culvert is the factor that moves the price most on Rockingham County jobs, and we'll walk through it with you on site.