Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Henry County · 1 hr 5 min from Greensboro

Building Pads in Martinsville, VA

A level, compacted pad your foundation crew can trust.

Building pad work in Martinsville is where we spend a lot of our time, usually working directly with a builder or a metal building dealer. We stake the footprint, strip the organics, build the fill in thin compacted lifts and hand off a pad that's where the plan says it is.

Where a geotech is involved on a Martinsville project, we schedule their density tests between lifts rather than at the end. It's easier to fix a lift that fails than to tear down a finished pad, and it keeps the builder's timeline intact.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Martinsville ground conditions and how they shape building pads

Martinsville and Henry County are where the Virginia Piedmont starts to lift toward the Blue Ridge, and the ground gets steeper and rockier than Danville's. The soils are Cecil, Pacolet and Rion on the ridges with Chewacla along the Smith River, Leatherwood Creek and Beaver Creek. The Smith is a cold tailwater below Philpott Dam and its bottoms stay wet and shaded. Old tobacco and furniture-town land that went idle is loblolly, Virginia pine, sweetgum and tulip poplar now, with autumn olive, multiflora rose and kudzu on every road cut and old homeplace. The hollows toward Fieldale and Bassett hold mountain laurel.

Around the Smith River, the Dick & Willie Passage trail and Axton, the properties we're usually called to look like this:

  • Old tobacco farms along US-220, US-58 and toward Ridgeway and Axton reclaimed for cattle, hay or a homestead
  • Working cattle farms with fence rows lost to rose and autumn olive and farm roads that wash every spring
  • Smith River and Philpott cabin sites wanting clearing on a grade and a path to the water

What building pads jobs look like around Martinsville

A typical Martinsville call for building pads looks like this: Old tobacco farms along US-220, US-58 and toward Ridgeway and Axton reclaimed for cattle, hay or a homestead. We've handled that exact situation around Axton and Martinsville Speedway more times than we can count.

The other common one is New home sites on crawl space, slab or basement foundations, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

Madison, Eden and Danville are in the same loop as Martinsville for us — same crew, same pricing basis.

Why Martinsville property owners call A&R

The pad under your Martinsville building is built by the owner. Clark is a veteran and a working firefighter, and he runs the machine, reads the plan and sets the laser himself.

Building in Martinsville? Contact A&R Land Services for a compacted, laser-leveled pad anywhere in Henry County.

Building Pads in Martinsville: questions

How high should a building pad be above grade?

High enough that water runs off it in every direction. A few inches above surrounding grade with a slight crown is typical for a crawl space home; a slab pad gets set a specific depth below finished floor so the stone and concrete land at the right height. Your builder's finished floor elevation is the number we grade to.

Can you build a pad on a sloped lot?

That's most of what we do. On a slope the pad is cut into the high side and filled on the low side, with the fill compacted in lifts so the downhill edge doesn't settle. Steep lots sometimes need a retaining wall or an engineered fill section; we'll tell you if yours is one of those before we quote it.

How far is A&R Land Services from Martinsville?

We're based in Greensboro, about 1 hour 5 minutes from Martinsville. Henry County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near the Smith River and the Dick & Willie Passage trail?

Yes. We work throughout Martinsville and the surrounding Henry County area, including properties around the Smith River, the Dick & Willie Passage trail and Axton. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a building pads job in Henry County?

Concrete slabs for equipment sheds, carports and patios is the most common version of it around Martinsville. We review the site plan, stake the footprint with working room around it, set a laser benchmark to the finished floor elevation, and work out cut and fill. Whether fill balances on site or has to be delivered is the factor that moves the price most on Henry County jobs, and we'll walk through it with you on site.

Building Pads in Martinsville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate