The ground in Stoneville is red clay, and red clay makes a great pad or a terrible one depending on who built it. A&R Land Services is about 42 minutes from Stoneville, and we build pads the way the material demands: in lifts, at the right moisture, compacted as we go.
The pads we build around Stoneville are mostly on the sloped parcels left after the flat ground got developed. That means a cut on the high side and a compacted fill on the low side, and the fill is where the care goes. We place it in six-to-eight-inch layers and track in every one before the next goes down.



Stoneville ground conditions and how they shape building pads
Jobs around Stoneville are mostly rural. We reclaim pasture for cattle operations that want to expand back into fields they let go, reopen fence lines along Settle Bridge Road and Iron Works Road, and clear house sites for families who bought ten acres off US-220 Business for a modular or a stick build. The 1998 tornado track still shows in places as a band of even-aged pine and sweetgum regrowth, and we have cleared more than one of those stands for owners who finally decided to put the land back into use. Hunting leases north toward the state line want lanes and interior roads.
Around NC-135, Matrimony Creek and NC-770, the properties we're usually called to look like this:
- Even-aged pine regrowth from the 1998 tornado track being cleared for new use
- Cattle and hay farms along NC-770 and Price Road expanding back into pine-covered former pasture
- Ten-acre home sites off US-220 Business for modular and stick-built houses needing pads, driveways and septic areas
What building pads jobs look like around Stoneville
A typical Stoneville call for building pads looks like this: Even-aged pine regrowth from the 1998 tornado track being cleared for new use. We've handled that exact situation around NC-770 and US-220 more times than we can count.
The other common one is Metal buildings, pole barns, workshops and detached garages, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
Neighbors in Mayodan, Wentworth and Madison call us for the same work; Stoneville sits right in the middle of that route.
Why Stoneville property owners call A&R
We build Rockingham County pads to the finished floor elevation on the plan, checked with a laser, with corners staked and overbuild for the crew. Builders in Stoneville get a pad they can trust without re-shooting it.
We'll walk the Stoneville lot with you or your builder, measure the cut and fill, and give you a written price for the pad.
Building Pads in Stoneville: questions
How much does it cost to build a house pad in NC?
The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.
How high should a building pad be above grade?
High enough that water runs off it in every direction. A few inches above surrounding grade with a slight crown is typical for a crawl space home; a slab pad gets set a specific depth below finished floor so the stone and concrete land at the right height. Your builder's finished floor elevation is the number we grade to.
How far is A&R Land Services from Stoneville?
We're based in Greensboro, about 42 minutes from Stoneville. Rockingham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle building pads near NC-135 and Matrimony Creek?
Yes. We work throughout Stoneville and the surrounding Rockingham County area, including properties around NC-135, Matrimony Creek and NC-770. If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach building pads on Stoneville ground?
Additions where the new footprint sits on unprepared ground is the most common version of it around Stoneville. We review the site plan, stake the footprint with working room around it, set a laser benchmark to the finished floor elevation, and work out cut and fill. Depth of cut and height of fill — sloped lots cost more than flat ones is the factor that moves the price most on Rockingham County jobs, and we'll walk through it with you on site.