Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Guilford County · 15 min from Greensboro

Final Grading in McLeansville, NC

The last pass — smooth, sloped and ready for seed, sod or stone.

A&R Land Services does final grading for new homes, additions and torn-up yards throughout McLeansville and Guilford County. Veteran and fireman owned, owner on the machine, and a finished surface that drains and grows grass.

Summer storms in Guilford County will find every low spot in a yard within a week of the grade going down. That's why we laser-check the finished surface rather than eyeballing it. A McLeansville lawn that ponds after the first thunderstorm is a grade that wasn't checked.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

McLeansville ground conditions and how they shape final grading

East of Greensboro along US-70 and I-85, McLeansville is a wide stretch of rolling farm ground that's turning into subdivisions one field at a time. The high ground is Cecil clay, but pockets of Enon and Iredell show up around Mt. Hope Church Road and toward Gibsonville, and those spots are wet, slick and slow. Buffalo Creek and Reedy Fork both pass near here on their way to the Haw River, and the bottoms along them are Chewacla silt that floods in a hard rain. Fields that stopped being farmed grow up in loblolly first, then sweetgum and red cedar, with privet and honeysuckle underneath.

Around I-85, Buffalo Creek and McLeansville Road, the properties we're usually called to look like this:

  • Three- to ten-acre homesteads off Huffine Mill, Youngs Mill and Frieden Church Road with overgrown back acreage and lost fence lines
  • Subdivision build lots along McLeansville Road and NC-61 needing pine thickets cleared and pads leveled
  • Storm-damaged tracts where downed loblolly needs cleanup and the brush mulched

What final grading jobs look like around McLeansville

A typical McLeansville call for final grading looks like this: Three- to ten-acre homesteads off Huffine Mill, Youngs Mill and Frieden Church Road with overgrown back acreage and lost fence lines. We've handled that exact situation around McLeansville Road and Youngs Mill Road more times than we can count.

The other common one is New homes after the trades are out and before landscaping, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

If you're just outside McLeansville — Whitsett, Gibsonville, Browns Summit or anywhere between — you're still inside our regular range.

Why McLeansville property owners call A&R

If the McLeansville lot needs a french drain, a swale cut, or a gravel drive topped before the lawn goes in, we handle it in the same visit so the yard isn't torn up twice.

Call or text (336) 392-8138 for a free final grading estimate in McLeansville. We'll look at the lot, count the topsoil loads, and give you a written price.

Final Grading in McLeansville: questions

How much topsoil do I need for a new lawn?

Three to four inches over the lawn area is a good target in our clay. Less than that and the grass roots hit clay and stall in the first dry spell; more than that is money you don't need to spend. A quarter acre of lawn at four inches works out to roughly 130 cubic yards, which is several trailer loads. We'll do that math on your lot.

Can you grade around a septic drain field?

Yes, carefully. We grade over drain fields with light passes only, never cut into them, and keep heavy loads off the trenches. The goal is to shed surface water away from the field so it doesn't stay saturated. If your septic installer just finished, we'll coordinate with them on where the lines run.

How far is A&R Land Services from McLeansville?

We're based in Greensboro, about 15 minutes from McLeansville. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle final grading near I-85 and Buffalo Creek?

Yes. We work throughout McLeansville and the surrounding Guilford County area, including properties around I-85, Buffalo Creek and McLeansville Road. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a final grading job in Guilford County?

Lots where a previous grade was left rough or never topsoiled is the most common version of it around McLeansville. Construction scrap picked up, spoil piles spread or hauled, ruts knocked flat. Anything buried that would kill grass or break a shovel comes out now. Seed-ready vs. sod-ready finish, and whether seeding is included is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Final Grading in McLeansville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate