Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Chatham County · 50 min from Greensboro

Building Pads in Siler City, NC

A level, compacted pad your foundation crew can trust.

Building pad work in Siler City is where we spend a lot of our time, usually working directly with a builder or a metal building dealer. We stake the footprint, strip the organics, build the fill in thin compacted lifts and hand off a pad that's where the plan says it is.

Where a geotech is involved on a Siler City project, we schedule their density tests between lifts rather than at the end. It's easier to fix a lift that fails than to tear down a finished pad, and it keeps the builder's timeline intact.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Siler City ground conditions and how they shape building pads

Siler City is slate-belt ground almost everywhere — Georgeville, Badin and Tatum silt loams that are shallow over fractured slate and drain like a sieve. It's good mulching country because it stays firm, but once you need to dig a trench or cut a building pad the rock shows up fast and it changes what a job costs. The Rocky River runs just east of town and Loves Creek and Bear Creek drain the rest of the township. Pasture left idle here grows up in eastern red cedar and Virginia pine before anything else, and the old fence rows are solid with honeysuckle and multiflora rose.

Around the Rocky River, the CAM megasite at Moncure and Bear Creek, the properties we're usually called to look like this:

  • Wooded one- to five-acre home lots in new subdivisions off the bypass that need lot clearing and pad prep over shallow rock
  • Hunting tracts along the Rocky River and Bear Creek needing trails, food plots and firebreaks
  • Twenty- to one-hundred-acre pasture tracts around Bonlee, Bennett and Goldston reclaimed from cedar and pine

What building pads jobs look like around Siler City

A typical Siler City call for building pads looks like this: Wooded one- to five-acre home lots in new subdivisions off the bypass that need lot clearing and pad prep over shallow rock. We've handled that exact situation around Bear Creek and Bray Park more times than we can count.

The other common one is Additions where the new footprint sits on unprepared ground, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

We also cover building pads in Ramseur, Snow Camp and Pittsboro, so if you've got property in more than one spot we can often batch the work.

Why Siler City property owners call A&R

The pad under your Siler City building is built by the owner. Clark is a veteran and a working firefighter, and he runs the machine, reads the plan and sets the laser himself.

Building in Siler City? Contact A&R Land Services for a compacted, laser-leveled pad anywhere in Chatham County.

Building Pads in Siler City: questions

How high should a building pad be above grade?

High enough that water runs off it in every direction. A few inches above surrounding grade with a slight crown is typical for a crawl space home; a slab pad gets set a specific depth below finished floor so the stone and concrete land at the right height. Your builder's finished floor elevation is the number we grade to.

How far from Greensboro will you build a pad?

About an hour and twenty minutes in any direction. That covers the Triad plus north to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh.

How far is A&R Land Services from Siler City?

We're based in Greensboro, about 50 minutes from Siler City. Chatham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near the Rocky River and the CAM megasite at Moncure?

Yes. We work throughout Siler City and the surrounding Chatham County area, including properties around the Rocky River, the CAM megasite at Moncure and Bear Creek. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a building pads job in Chatham County?

Modular and manufactured home pads is the most common version of it around Siler City. We review the site plan, stake the footprint with working room around it, set a laser benchmark to the finished floor elevation, and work out cut and fill. Whether fill balances on site or has to be delivered is the factor that moves the price most on Chatham County jobs, and we'll walk through it with you on site.

Building Pads in Siler City, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate