Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Chatham County · 50 min from Greensboro

Pole Barn Pads for Siler City & Chatham County

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

Rural ground around Siler City is rarely flat, so most shop pads here are a cut on one side and a compacted fill on the other. We build them that way across Chatham County and we know how to keep the low corner from settling under the slab.

Metal building dealers serving Siler City typically send a footprint and a date. We work from their drawings, stake the overbuild, and have the Chatham County pad finished and laser-checked before the erection crew rolls in.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Siler City ground conditions and how they shape pole barn pads

Chatham County runs its own sediment and erosion control program and requires a plan over one disturbed acre; around Siler City that mostly affects the commercial work. The Rocky River corridor carries stream buffers. Rock is the bigger practical issue — we probe pads before we quote excavation so nobody gets surprised. For pasture and brush work the slate ground is a gift: we've run mulchers here in January when the Triassic clay fifteen miles east was impassable.

Around Alston Bridge Road, the Siler City bypass and US-421, the properties we're usually called to look like this:

  • Wooded one- to five-acre home lots in new subdivisions off the bypass that need lot clearing and pad prep over shallow rock
  • Twenty- to one-hundred-acre pasture tracts around Bonlee, Bennett and Goldston reclaimed from cedar and pine
  • Old homeplaces with collapsed outbuildings and a half-acre of privet to clear before a sale

What pole barn pads jobs look like around Siler City

One job we see over and over near US-421: Wooded one- to five-acre home lots in new subdivisions off the bypass that need lot clearing and pad prep over shallow rock. That's textbook pole barn pads work, and it's usually a one-mobilization job for us.

Out toward Bonlee the pattern changes — more Detached garages and carports. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Siler City site walk is what the ground needs to do afterward, because that decides how far we take it.

If you're just outside Siler City — Snow Camp, Asheboro, Staley or anywhere between — you're still inside our regular range.

Why Siler City property owners call A&R

Your Siler City pad is built by the owner. Clark is a veteran and a working firefighter, and he's on the machine from stripping the topsoil to the final laser check.

Building a shop or barn in Siler City? Contact A&R Land Services and we'll have the Chatham County pad ready before the crew arrives.

Pole Barn Pads in Siler City: questions

How big should the pad be for my pole barn?

The building footprint plus working room — usually five to ten feet beyond each wall. That gives the post crew or concrete finishers space, keeps the pad edge from sloughing under the building, and gives roof runoff somewhere to land that isn't the wall line. If a lean-to or a future addition is planned, tell us and we'll size for it.

Do you put stone on the pad?

If the building has a gravel floor, yes — a compacted crusher-run base over the clay pad. If a slab is coming, the concrete contractor usually specifies the stone depth under it and we'll place it to their spec. On a pure clay pad with no stone, the first rain turns the floor to mud, so we recommend some base on nearly every one.

How far is A&R Land Services from Siler City?

We're based in Greensboro, about 50 minutes from Siler City. Chatham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near Alston Bridge Road and the Siler City bypass?

Yes. We work throughout Siler City and the surrounding Chatham County area, including properties around Alston Bridge Road, the Siler City bypass and US-421. If you're outside the town limits, send the address and we'll confirm it's in range.

What does pole barn pads typically involve on a Siler City property?

Horse barns and run-in sheds is the most common version of it around Siler City. Walk-through with you or the building crew, corners and elevation confirmed, pad ready for posts or concrete. Clearing and stump removal needed in the footprint is the factor that moves the price most on Chatham County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Siler City, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate