Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Chatham County · 50 min from Greensboro

Rough Grading for Siler City & Chatham County

The heavy cut-and-fill that gives a site its shape before anything gets built on it.

A&R Land Services does the earth shaping for new construction in Siler City and the rest of Chatham County. Cut, fill, compact, drain. We balance material on site wherever the lot allows it, which keeps dump trucks off your road and money in your pocket.

Anything over an acre of disturbed ground in Chatham County needs an erosion control plan before the first cut. We'll tell you up front whether your Siler City rough grading job crosses that line, because finding out from an inspector mid-job is expensive.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Siler City ground conditions and how they shape rough grading

Chatham County runs its own sediment and erosion control program and requires a plan over one disturbed acre; around Siler City that mostly affects the commercial work. The Rocky River corridor carries stream buffers. Rock is the bigger practical issue — we probe pads before we quote excavation so nobody gets surprised. For pasture and brush work the slate ground is a gift: we've run mulchers here in January when the Triassic clay fifteen miles east was impassable.

Around Bear Creek, US-64 and the CAM megasite at Moncure, the properties we're usually called to look like this:

  • Twenty- to one-hundred-acre pasture tracts around Bonlee, Bennett and Goldston reclaimed from cedar and pine
  • Old homeplaces with collapsed outbuildings and a half-acre of privet to clear before a sale
  • Hunting tracts along the Rocky River and Bear Creek needing trails, food plots and firebreaks

What rough grading jobs look like around Siler City

Most of our rough grading work in Siler City comes from two directions. First, twenty- to one-hundred-acre pasture tracts around Bonlee, Bennett and Goldston reclaimed from cedar and pine. Second, pond banks, berms and earth shaping for privacy or screening.

Both show up regularly along the CAM megasite at Moncure and US-421, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.

We also cover rough grading in Ramseur, Asheboro and Pittsboro, so if you've got property in more than one spot we can often batch the work.

Why Siler City property owners call A&R

The person who reviews your Siler City site plan is the person on the dozer blade. Clark is a veteran, a working firefighter and the owner of A&R Land Services, and he doesn't hand the job to a crew who've never seen the lot.

Ready to shape your Siler City site? Reach out to A&R Land Services. We rough grade throughout Chatham County and we're usually on site within a couple of weeks of the estimate.

Rough Grading in Siler City: questions

How much does rough grading cost for a house lot?

The honest answer is that it's driven by how many yards of dirt have to move and whether any of it comes in on a truck. A fairly flat lot that just needs shaping and a pad roughed in is a day or two with one machine. A sloped lot that needs a deep cut on one side and a tall fill on the other, with fill delivered, is a bigger number. We give a written estimate after walking it, and we try to balance cut and fill on site to keep trucking out of it.

Do I need a grading permit in North Carolina?

Disturbing more than an acre requires an approved sediment and erosion control plan under state rules, administered by the county or the state depending on where you are. Under an acre, most counties don't require a grading permit, though cities like Greensboro and Winston-Salem have stormwater and buffer rules that can apply. We'll point you to the right office if your lot is near the line.

How far is A&R Land Services from Siler City?

We're based in Greensboro, about 50 minutes from Siler City. Chatham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle rough grading near Bear Creek and US-64?

Yes. We work throughout Siler City and the surrounding Chatham County area, including properties around Bear Creek, US-64 and the CAM megasite at Moncure. If you're outside the town limits, send the address and we'll confirm it's in range.

What does rough grading typically involve on a Siler City property?

Shop, barn and garage locations on sloped ground is the most common version of it around Siler City. Topsoil stripped and stockpiled for later. Cuts made from the high side with the dozer blade and excavator, working the clay when it's at the right moisture to place and compact. Cubic yards of cut and fill — the single biggest factor is the factor that moves the price most on Chatham County jobs, and we'll walk through it with you on site.

Rough Grading in Siler City, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate