If your building kit is on order and the site in Sanford isn't ready, we're about 1 hour away in Greensboro and this is work we do every week. Pads for post-frame barns, metal shops, garages and storage buildings, built to your supplier's footprint.
Many Sanford buildings go up with a gravel floor first and a slab a year or two later. We build the pad with that in mind — compacted hard, crusher-run base on top — so the concrete contractor has a ready base when the budget allows.



Sanford ground conditions and how they shape pole barn pads
Lee County runs the state one-acre erosion threshold and there's watershed protection along the Cape Fear and Deep River. On the ground, the Triassic clay side gets grading only in dry windows and mulching with the head held high so the shale isn't torn up; the sandy side can be worked in the rain but needs erosion control because it washes; the slate side is firm but rocky. Knowing which parcel is which before we quote saves everyone a bad week.
Around Carthage Street, US-1 and the Deep River, the properties we're usually called to look like this:
- Builder lots around Tramway, Carolina Trace and the US-421 bypass needing lot clearing and pad prep
- Deep River and Cape Fear hunting and recreation tracts needing trails, firebreaks and a camp site
- Sandhills-edge lots east of town needing clearing and erosion control on sandy slopes
What pole barn pads jobs look like around Sanford
A typical Sanford call for pole barn pads looks like this: Builder lots around Tramway, Carolina Trace and the US-421 bypass needing lot clearing and pad prep. We've handled that exact situation around the Deep River and US-421 bypass more times than we can count.
The other common one is Detached garages and carports, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
Pittsboro, Cary and Liberty are in the same loop as Sanford for us — same crew, same pricing basis.
Why Sanford property owners call A&R
Our Sanford pad estimates tell you the overbuild, the fill, the stone and the drainage work. If you want to add the driveway or clear more of the lot, it's itemized so you can see the cost.
A&R Land Services builds pads across Lee County from Greensboro. Reach out about your Sanford building.
Pole Barn Pads in Sanford: questions
How big should the pad be for my pole barn?
The building footprint plus working room — usually five to ten feet beyond each wall. That gives the post crew or concrete finishers space, keeps the pad edge from sloughing under the building, and gives roof runoff somewhere to land that isn't the wall line. If a lean-to or a future addition is planned, tell us and we'll size for it.
What areas do you build pads in?
Greensboro and all of the Triad, plus roughly an hour and twenty minutes out — Reidsville, Eden, Mount Airy, Elkin, Lexington, Salisbury, Albemarle, Asheboro, Sanford, Burlington, Durham, Chapel Hill and Raleigh.
How far is A&R Land Services from Sanford?
We're based in Greensboro, about 1 hour from Sanford. Lee County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle pole barn pads near Carthage Street and US-1?
Yes. We work throughout Sanford and the surrounding Lee County area, including properties around Carthage Street, US-1 and the Deep River. If you're outside the town limits, send the address and we'll confirm it's in range.
What does pole barn pads typically involve on a Sanford property?
Horse barns and run-in sheds is the most common version of it around Sanford. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Whether fill balances on site or is trucked in is the factor that moves the price most on Lee County jobs, and we'll walk through it with you on site.