Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Davidson County · 30 min from Greensboro

Thomasville Rough Grading

The heavy cut-and-fill that gives a site its shape before anything gets built on it.

Rough grading sets the bones of a Thomasville property. Get it wrong and every trade after you fights it — footings, slabs, drives, the lawn. We're about 30 minutes from Thomasville, and we grade it right the first time so nobody has to come back.

The ground around Thomasville is rolling Piedmont, so most lots have a high side and a low side and a natural drainage line between them. Rough grading here is usually a matter of cutting the upper side, filling the lower, and making sure the pad sits above the wet end. We read that on the walk-through before any stakes go in.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Thomasville ground conditions and how they shape rough grading

A lot of our Thomasville calls come from the Fairgrove, Pilot and Hasty communities south and east of town, where old farms along NC-109, Kennedy Road and Liberty Drive are being split into two to ten acre home sites and the buyers need pads, septic areas and driveways opened in woods that were pasture a generation back. Inside the city we clear infill lots in the older mill neighborhoods and clean up vacant industrial parcels along Julian Avenue and the railroad for resale. Horse people around Fairgrove keep us busy with pasture reclamation and trail cutting.

Around Hamby Creek, Abbotts Creek and Randolph Street, the properties we're usually called to look like this:

  • Lots draining toward Lake Thom-A-Lex that must be cleared and stabilized under watershed rules
  • Infill lots in the older mill neighborhoods inside the city that have grown up in sweetgum and privet
  • Vacant furniture-era industrial parcels along Julian Avenue and the railroad being cleared and rough graded for resale

What rough grading jobs look like around Thomasville

A typical Thomasville call for rough grading looks like this: Lots draining toward Lake Thom-A-Lex that must be cleared and stabilized under watershed rules. We've handled that exact situation around Randolph Street and Kennedy Road more times than we can count.

The other common one is Sloped yards being terraced or opened up for use, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

If you're just outside Thomasville — Trinity, Archdale, Wallburg or anywhere between — you're still inside our regular range.

Why Thomasville property owners call A&R

Laser-checked elevations on every Davidson County rough grade. Builders in Thomasville appreciate handing a site to their foundation crew that's where the plan says it is, not somewhere in the neighborhood.

Send us your site plan and the address of the Thomasville lot. We'll come walk it and give you a written price for the dirt work.

Rough Grading in Thomasville: questions

What's the difference between rough grading and final grading?

Rough grading moves the volume and gets the site within a few inches of its planned shape — cuts, fills, drainage pattern, pad location. Final grading is the last step after construction: smoothing, setting the exact slope, spreading topsoil and leaving it ready for seed or sod. Most new builds need rough grading before the foundation and final grading after the framers and trades are gone.

How far out from Greensboro do you travel for grading?

About an hour and twenty minutes in any direction — the full Triad, up to Virginia, out to Mount Airy and Elkin, down to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Bigger rough grading jobs make the longer drives worthwhile.

How far is A&R Land Services from Thomasville?

We're based in Greensboro, about 30 minutes from Thomasville. Davidson County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle rough grading near Hamby Creek and Abbotts Creek?

Yes. We work throughout Thomasville and the surrounding Davidson County area, including properties around Hamby Creek, Abbotts Creek and Randolph Street. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach rough grading on Thomasville ground?

New home sites after clearing, before footings go in is the most common version of it around Thomasville. We go over your site plan or sketch, confirm the house or shop location, walk the natural drainage, and check what's underground. If there's no plan, we help you make one on the spot. Soil moisture and season is the factor that moves the price most on Davidson County jobs, and we'll walk through it with you on site.

Rough Grading in Thomasville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate