Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Davidson County · 30 min from Greensboro

Building Pads for Thomasville & Davidson County

A level, compacted pad your foundation crew can trust.

The ground in Thomasville is red clay, and red clay makes a great pad or a terrible one depending on who built it. A&R Land Services is about 30 minutes from Thomasville, and we build pads the way the material demands: in lifts, at the right moisture, compacted as we go.

The pads we build around Thomasville are mostly on the sloped parcels left after the flat ground got developed. That means a cut on the high side and a compacted fill on the low side, and the fill is where the care goes. We place it in six-to-eight-inch layers and track in every one before the next goes down.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Thomasville ground conditions and how they shape building pads

Iredell and Enon clay is the thing to respect here. It stays saturated for weeks after a wet spell, heaves when it freezes, and a pad graded on it in February will move. We wait for dry ground on those soils and build pads in compacted lifts with drainage figured in. Anything draining toward Lake Thom-A-Lex falls under watershed rules and the county erosion office is strict about it; the Hamby Creek and Rich Fork corridors have buffers too. Ridge lots on Cecil ground can be worked year-round if it has been dry a few days.

Around I-85, Rich Fork Creek and Hasty, the properties we're usually called to look like this:

  • Vacant furniture-era industrial parcels along Julian Avenue and the railroad being cleared and rough graded for resale
  • Infill lots in the older mill neighborhoods inside the city that have grown up in sweetgum and privet
  • Lots draining toward Lake Thom-A-Lex that must be cleared and stabilized under watershed rules

What building pads jobs look like around Thomasville

A typical Thomasville call for building pads looks like this: Vacant furniture-era industrial parcels along Julian Avenue and the railroad being cleared and rough graded for resale. We've handled that exact situation around Hasty and Abbotts Creek more times than we can count.

The other common one is Concrete slabs for equipment sheds, carports and patios, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

If you're just outside Thomasville — Jamestown, Welcome, Lexington or anywhere between — you're still inside our regular range.

Why Thomasville property owners call A&R

We build Davidson County pads to the finished floor elevation on the plan, checked with a laser, with corners staked and overbuild for the crew. Builders in Thomasville get a pad they can trust without re-shooting it.

We'll walk the Thomasville lot with you or your builder, measure the cut and fill, and give you a written price for the pad.

Building Pads in Thomasville: questions

Can you build a pad on a sloped lot?

That's most of what we do. On a slope the pad is cut into the high side and filled on the low side, with the fill compacted in lifts so the downhill edge doesn't settle. Steep lots sometimes need a retaining wall or an engineered fill section; we'll tell you if yours is one of those before we quote it.

How far from Greensboro will you build a pad?

About an hour and twenty minutes in any direction. That covers the Triad plus north to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh.

How far is A&R Land Services from Thomasville?

We're based in Greensboro, about 30 minutes from Thomasville. Davidson County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near I-85 and Rich Fork Creek?

Yes. We work throughout Thomasville and the surrounding Davidson County area, including properties around I-85, Rich Fork Creek and Hasty. If you're outside the town limits, send the address and we'll confirm it's in range.

What does building pads typically involve on a Thomasville property?

Sloped lots that need a cut-and-fill pad to hold a level floor is the most common version of it around Thomasville. We review the site plan, stake the footprint with working room around it, set a laser benchmark to the finished floor elevation, and work out cut and fill. Whether fill balances on site or has to be delivered is the factor that moves the price most on Davidson County jobs, and we'll walk through it with you on site.

Building Pads in Thomasville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate