Mulching is priced by time, then translated to acres
Here's the thing most people don't realize: forestry mulchers are priced by the machine hour, and the acres-per-day number depends entirely on what's growing. On an acre of waist-high broomsedge, blackberry and privet, we can mulch two or three acres in a day. On an acre of eight-inch sweetgum and loblolly packed tight, that same day gets us through maybe half an acre.
So when we quote per acre, we're estimating how long your ground will take, then dividing. The honest ranges in this area run from a few hundred dollars per acre for light brush to a couple thousand or more for dense, mature growth with bigger trees that need felling first.
Density: the single biggest factor
We mentally sort properties into light, medium and heavy. Light is old pasture or a lot that was cleared five to eight years ago — grass, briars, privet, saplings under three inches. Medium is ten to twenty years of succession: sweetgum, red maple, loblolly pine and cedar in the four-to-eight-inch range, with privet and honeysuckle underneath. Heavy is anything older or thicker than that — a closed canopy with stems you can't see through.
Light ground is cheap because the head barely slows down. Medium is the most common thing we see in Guilford, Randolph, Rockingham and Alamance counties and sits squarely in the middle of the range. Heavy ground is where mulching starts to compete on cost with traditional clearing, because felling and sectioning big stems is slow regardless of how you dispose of them.
Pine is faster than hardwood. Pine wood is soft and the trees fall predictably. Hardwoods are denser, resist the teeth, and the crowns are wider and tangled. Thirty loblollies per acre mulch far faster than thirty white oaks.
Tree diameter and what we do with big ones
Our mulcher head runs efficiently up to about eight inches at the stump. Beyond that we're taking multiple passes and the production rate drops off hard. Past twelve inches we fell the tree with a saw, drop it where we can get at it, and mulch the limbs and top. The trunk either gets sectioned for you to keep, mulched slowly if you want it gone, or hauled off.
If a tract has a lot of big stems — say a dozen or more twelve-plus-inch trees per acre — we'll usually recommend a hybrid: fell and stack the logs, mulch everything else. That keeps the per-acre number sane. If you'd rather every stick be gone, that's fine, but expect the price to reflect sawing and hauling time.
Stump height also matters. Mulching a stump flush takes two or three extra passes compared to leaving it at four inches. If you plan to bush hog, four inches is fine. If you're going to finish-mow or walk it barefoot, we go flush, and that adds time.
Slope, rocks, wet ground and access
The Piedmont isn't mountains, but there are plenty of steep ravines along creeks in the northern counties and around the Uwharries. Side slopes slow us down because we have to work in safe directions and sometimes in shorter passes. Rocky ground — common around Mount Airy, Stokes County and the Uwharrie edges — chews up teeth, which is a real cost on the machine.
Wet ground is the one that changes a quote the most. Red clay that's saturated doesn't support even a track loader well, and we rut and spin instead of cutting. We'll tell you if we need to wait for a dry week. It's not us being picky — it's protecting your ground and our production.
Access means can we get a truck and trailer to the site, and can the machine get from the trailer to the work. A gate under eight feet wide, a soft driveway, overhead lines in the way, or a long walk through a neighbor's yard all add time at both ends of the day.
Minimums, half days and the mobilization problem
Every job starts with loading the machine, driving it to you, unloading, and walking the site. That's time we spend whether you've got a quarter acre or ten. So small jobs get priced as a half day or a day rather than by the acre, and the per-acre rate on a half-acre lot looks high compared to a ten-acre tract. That's not a markup; it's arithmetic.
Travel distance factors in too. We work roughly an hour and twenty minutes out from Greensboro — up to the Virginia line, out to Mount Airy and Elkin, down to Salisbury and Albemarle, over toward Durham and Chapel Hill. The far edges of that circle carry a little more mobilization than a job in Guilford or Alamance County, and we'll say so up front rather than bury it in the per-acre rate.
If you've got a small job, the cheapest way to get it done is to pair it with a neighbor who also needs work, or to add on the other things you've been meaning to do — the fence line, the overgrown ditch, the trail to the back of the property. Once we're there with the machine, each additional hour is a lot cheaper than a separate trip.
What you get for the money, and what you don't
A mulching price includes the cutting and the chip layer left in place. It does not usually include hauling logs, grading, seeding, or treating resprouts. We'll quote those separately if you want them, and we'll tell you up front if we think you'll need them for your purpose.
What a mulched acre looks like when we leave: open ground you can walk or drive a side-by-side across, stumps at the height we agreed, chips two to six inches deep, no piles, no ruts if the ground was dry. Within a few months the chips darken and settle. Within a year it reads as a maintained woodland or rough pasture, depending on what you do with it.
If someone quotes you a mulching price that's a fraction of everybody else's, ask what machine they're running and how many passes they make. A small, low-flow head on a rental skid steer can take three times as long and leave a rough, shredded mess that still has four-foot stobs standing.
How to get a lower per-acre number
Let us schedule in a dry window — late summer or a dry stretch in winter. Mark your boundaries so we're not clearing a neighbor's land or stopping to figure out where the line is. Accept a four-inch stump height if you can live with it. Skip the hauling and keep the chips. Bundle multiple tasks into one trip.
And tell us honestly how thick it is. Send photos, or give us the address so we can check the aerials. A property described as a little brushy that turns out to be fifteen years of sweetgum is going to be re-quoted on site, and nobody enjoys that conversation.
Related questions
How many acres can you mulch in a day?
Light brush: two to three acres. Medium regrowth with four-to-eight-inch stems: roughly one acre. Heavy, mature growth with big trees to fell: a half acre or less.
Do you charge extra for hardwoods versus pines?
Not as a line item, but hardwoods take longer so the time-based price reflects it. A pine-dominant tract is the cheapest mulching job per acre.
Can you mulch in the rain?
Light rain, yes. Saturated ground, no — we'd rut your clay and cut half as much. We'd rather reschedule a few days than damage your property.
Is there a minimum job size?
We price small jobs as a half day. That's the practical minimum because of load, haul and setup time.
Does mulching include the stumps?
We mulch stumps to the agreed height, usually two to four inches, or flush for a little more time. If a stump has to be gone below grade for a pad or a septic field, it gets pulled.
About the author. Clark Sellars owns and operates A&R Land Services in Greensboro, NC. He's a veteran and a working firefighter, and he runs the mulcher, the track loader and the excavator on every job the company takes.