Why nobody will give you a price over the phone
We get asked for a per-acre number every week, and we understand why. But two one-acre lots on the same road can be a few hundred dollars apart or several thousand apart, and the difference is what's standing on them, what's under them, and what you want left when we're done. Anybody who quotes you sight unseen is either padding the number to cover themselves or planning to change it later.
What we can do is explain what moves the price, give you ranges in plain words, and tell you how to make your job cheaper. Then we come look at it — on the county GIS first, then in person — and give you a firm number for a defined scope.
The five things that drive the number
Vegetation size and density is the first one. Light brush, privet and saplings under four inches mulch at a walking pace. Mixed pine and hardwood in the six-to-twelve-inch range slows everything down. Mature timber — eighteen-inch oaks, thirty-inch poplars — means felling, sawing, and hauling or burning, and each tree is its own small project.
Second is what happens to the stumps. Leaving them cut low is cheapest. Pulling and grubbing root balls out for a building pad or septic field is the most, because you've got to dig them, shake the dirt off, and then deal with a hole and a pile of roots.
Third is debris. Chips left in place cost nothing extra. Burning requires a dry window, a NC Forest Service permit, and someone to tend it. Hauling means dump trailer loads to a landfill or a wood recycler, and tipping fees add up fast on a heavily wooded acre.
Fourth is access and terrain. A flat lot with road frontage is easy. A steep lot behind a house with a narrow gate, overhead lines, a creek crossing, or soft ground costs more because we're slower and sometimes need a smaller machine. Fifth is what you want at the end: a mulched surface, rough-graded dirt, or a finish-graded, seeded site ready to build.
Rough ranges in words, not dollars
Forestry mulching of light-to-medium growth is the least expensive option — think a few hundred to a couple thousand per acre. Mulching thick, mature growth where we're felling big trees first runs into the low thousands per acre. Full traditional clearing with grubbing and rough grading on a wooded acre is typically several thousand per acre and climbs with timber size and hauling.
Small jobs — a half-acre behind a house, a fence line, a few hundred feet of overgrown driveway — are usually priced by the day or half day rather than the acre, because mobilization is a fixed cost no matter how little we cut. The first hour of any job is loading, driving, unloading and walking the site.
If you want one honest rule of thumb: the price roughly doubles each step from mulch-and-leave, to mulch-and-cut-stumps-low, to grub-and-haul, to grub-haul-grade-and-seed. Where your job lands in that ladder matters more than the acreage.
Permits and rules that can add to the bill
If your project disturbs more than one acre of ground, North Carolina's Sedimentation Pollution Control Act requires an approved erosion and sedimentation control plan before land-disturbing activity starts. Some counties and cities in the Triad have lower thresholds, and some are delegated local programs with their own fees and review times. Mulching with the root mat left intact is usually not considered land-disturbing; grubbing and grading are.
Lots in the Jordan Lake, Randleman Lake and Falls Lake watersheds carry riparian buffer rules along streams. Those don't necessarily cost money, but they limit what we can clear within the buffer, and if you planned to put a pad or driveway there, the plan changes. Tree ordinances in Greensboro and a few other municipalities can also require permits or replacement for removing larger trees on some properties.
Burn permits from the NC Forest Service are free, but burning is only permitted in certain conditions and not at all inside most city limits. If you can't burn, you haul, and hauling is usually the single biggest line item people don't expect.
How to make your clearing job cheaper
Decide what you actually need cleared. Most people over-clear. If you need a house pad, driveway and septic, that might be an acre and a half of a five-acre lot. Mulch the rest or leave it wooded. Keeping trees is free, and mature canopy is worth money when you sell.
Leave the chips. If a mulched finish is acceptable for your purpose — pasture, privacy, trails, visibility — you've eliminated hauling and burning entirely. Let us cut stumps low with the mulcher unless you need to mow the area with a finish mower.
One more: if there's marketable timber, call a logger or a consulting forester before you call us. A tract with enough mature pine or hardwood sawtimber can be logged first, sometimes for a check instead of a bill, and we come behind the logger to mulch the tops and grub what's left. That only works on larger tracts with real volume, but it's the single biggest cost saver when it applies.
Give us good access and a dry window. Let us schedule in a dry stretch so we're not fighting mud. Open the gate, mark the property pins, call NC 811 ahead of time if there's grading involved, and tell us about any septic lines, wells, or buried utilities you know about. Every surprise we find costs you time.
What a real quote from us looks like
We walk the property with you or on our own, mark the boundaries of the work on a map, and write up a scope: what's being mulched, what's being felled, what happens to stumps, what happens to debris, what the finished surface is, and what's excluded. Then a price for that scope. If you change the scope, the price changes, and we tell you before we do it.
A written scope also protects you on the back end. If a crew shows up, clears something they weren't supposed to, or leaves a burn pile you thought was being hauled, the scope is what you point to. We'd rather spend fifteen minutes writing it down than argue about it later.
We'll also tell you what we see that you might not be thinking about — a wet spot that needs a culvert before a driveway goes in, a stream buffer that moves your pad, a stand of privet that'll be back in two years unless it's treated. That's the part of the job that comes from working this ground, not from a price sheet.
If you're comparing bids, make sure they're for the same scope. A mulching quote and a grub-and-haul quote are not the same job, and the cheap one may leave you paying twice.
Related questions
Is it cheaper to clear land in winter?
Often, yes. Leaves are off so visibility is better, the ground is usually firmer between rains, and there's less demand. We also like late summer dry spells. Spring is the worst — wet clay and everything growing.
Do I have to pay to dispose of the trees?
Only if we haul them. Mulching leaves chips in place. Burning needs a permit and a dry window but costs little. Logs with value can sometimes stay on site for firewood or be sold if there's enough timber to interest a logger.
Will clearing raise my property taxes?
Clearing alone usually doesn't. Building does. If the land is in present-use value for forestry or agriculture, converting it can trigger a rollback, so check with the county tax office before you clear a tract that's been in that program.
Do you charge for an estimate?
No. We look at most properties on the county GIS first and then come out if the job looks like a fit.
About the author. Clark Sellars owns and operates A&R Land Services in Greensboro, NC. He's a veteran and a working firefighter, and he runs the mulcher, the track loader and the excavator on every job the company takes.