Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Land & Lot Clearing

Lot Clearing

From the road to the back pin — one lot, cleared right, ready for the next step.

Greensboro & the Triad80-minute radiusFree estimatesVeteran & fireman owned

A lot is a defined piece of ground with a purpose — a house going on it, a shop, a mobile home, a sale sign. Lot clearing is the work of getting that specific parcel from wooded or overgrown to a condition the builder, the surveyor or the buyer can actually work with. It's a tighter job than clearing open acreage because the property lines matter, the neighbors are close, and there's usually a setback, a septic area or a driveway corridor that has to come out exactly where the plan says.

Around Greensboro, the typical lot we clear is somewhere between a third of an acre and three acres, grown up in sweetgum, loblolly pine, volunteer cedar and a privet understory thick enough that you can't see the back corner from the street. We take it down with a forestry mulcher, handle the bigger trunks with a grapple, and pull stumps in the footprint where you'll build or dig. The rest of the lot can keep its mulch layer and its shade trees.

Clark runs every machine on the job himself. He's a veteran and a working firefighter, and the lot gets handled the way you'd expect from that — pins respected, keeper trees flagged and saved, the road frontage left clean so the neighbors aren't calling the county about you. Walk-through and estimate are free.

Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept
Kubota SVL97-2 beside a cleared gravel driveway with a house at the end
Done — driveway open end to end
Cleared lot with long tree shadows across bare ground and timber left at the tree line
Lot opened up, big timber kept at the line
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Cleared strip along a wooded property line next to a mowed lawn after brush was mulched
Property-line strip opened up along the lawn edge

How lot clearing works on Piedmont ground

Lot clearing starts with knowing where the lot actually is. On wooded parcels in Guilford, Randolph, Alamance and Rockingham counties the pins are often buried under twenty years of growth, and the fence you think is the line usually isn't. We ask for the plat or survey before the first pass, find the corners, and run a cleaned-up line along the boundary so the clearing stops where your ownership stops. Taking down the neighbor's trees is the fastest way to turn a build into a lawsuit, so we don't guess.

From there the job splits by what the lot is for. A homesite gets the house footprint, driveway and septic field cleared to bare dirt with stumps out, while the rest is mulched and the mature oaks and poplars are left standing. A lot going up for sale usually just needs to be opened up enough to show its size and shape — mulch everything under eight inches, leave the chips, and the listing photos change completely. A commercial pad or a mobile home site generally wants a full clear with the roots raked so a grading crew isn't fighting debris.

The Piedmont adds its own wrinkles. Red clay subsoil turns to grease after a soaking rain and a 10,000-pound track machine will rut it, so we schedule heavy work for dry stretches. Many in-town lots back up to a creek or a drainage ditch with a buffer that can't be disturbed. And if the total disturbed area crosses an acre, North Carolina's sediment and erosion control rules kick in and the county will want a plan on file before dirt moves. We tell you where your lot stands on all of that during the walk-through.

What the job looks like

Find the lines and walk it

Bring the survey or plat if you have one. We locate corners, flag the trees you want kept, note wet spots and the creek buffer if there is one, and talk through what the lot is being cleared for.

Written scope and price

The estimate spells out what's mulched, what's felled, which stumps come out, and how the finish is handled. Lot clearing is quoted per job after we've seen it, and the number doesn't change once the trailer's unhooked.

Mulch and fell

The mulcher takes everything under roughly eight to ten inches. Larger trunks get dropped and either bucked for firewood, piled, or hauled on the dump trailer, whichever you chose in the estimate.

Stumps and roots where it counts

In the building footprint, driveway and septic area we pull stumps with the mini excavator, then root rake so the pad is clean for the grading crew. Elsewhere the stumps get mulched to grade and left.

Finish and walk-through

Rough grade or rake, mulch spread or piled where you want it, road frontage and driveway cleaned. We walk the lot with you before we leave so nothing gets missed.

Best fit for

  • Wooded subdivision lots waiting on a builder
  • Rural homesites of one to five acres with a house, shop and septic planned
  • In-town lots that have gone to brush and drawn a code notice
  • Mobile home and modular home sites needing a clean, level footprint
  • Lots being listed for sale that buyers can't currently walk
  • Infill lots between existing houses where precision matters
  • Church, shop and small commercial parcels before site work begins

What drives the price

We don't quote lot clearing from a chart. These are the things that move the number, and we'll walk through each one with you on site:

  • Lot size and how much of it needs to be cleared versus thinned
  • Tree size — a lot full of six-inch pine is a different job than one with mature hardwoods
  • How many stumps come out versus get mulched flush
  • Whether debris stays as mulch, gets piled, or gets hauled off
  • Access — in-town lots with tight entrances slow the work down
  • Slope, wet ground and any creek buffer that limits where we can run
  • Finish grade and whether the pad needs to be ready for a footing crew

Equipment we bring

  • Compact track loader with a high-flow forestry mulching head
  • Grapple attachment for felled trunks and brush piles
  • Mini excavator with thumb for stump pulling and root removal
  • Root rake and stump bucket for cleaning the building footprint
  • Grading blade and box blade for the rough finish
  • Dump trailer for haul-off when the lot needs to be bare

Lot Clearing questions

How much does it cost to clear a lot in North Carolina?

The biggest drivers are tree size, density, and how much of the lot needs stumps out versus mulched over. A half-acre of saplings and privet with the chips left in place is the low end of what we do. A two-acre wooded lot with the house footprint stumped, raked and rough graded is several times that. We walk every lot before pricing it because the plat tells us the size but not the work. Estimates are free.

Do I need a permit to clear a lot in Greensboro or Guilford County?

For most residential lots under an acre of disturbance, no permit is required just to clear. Once you disturb more than an acre, North Carolina erosion and sediment control rules apply and the county wants a plan. Greensboro and some surrounding towns also have tree and buffer ordinances along streams. We'll tell you during the walk-through whether your lot touches any of that.

Can you clear a lot but save the big trees?

Yes, and that's how most homesite lots should be done. Flag the oaks, poplars and hickories you want and we clear around them — the mulcher works tight to a trunk without scarring it. You end up with a lot that looks established instead of scraped.

Do you remove the stumps or just cut the trees?

Both, depending on where they are. In the house footprint, driveway and septic field the stumps come out with the excavator so nothing rots under your foundation. Everywhere else they're mulched to grade and left — cheaper, and the roots hold the clay in place.

How long does it take to clear a one-acre lot?

A typical wooded acre with trees under ten inches is one to two days including rough cleanup. Add a day if the footprint needs stumps pulled and the pad raked. Heavier timber, wet ground or a tight in-town entrance all stretch it. The estimate includes a realistic schedule.

Can you leave the lot ready for the builder?

That's the goal on most jobs. We clear to the stakes, pull stumps in the footprint, root rake, and rough grade so the footing or pad crew isn't fighting debris. If you want the driveway roughed in and gravel down at the same time, we can do that in the same trip.

Where we do it

Lot Clearing across the Triad and beyond

Pick your town for local details — ground conditions, what we typically see there, and how far we are from you.

Near Greensboro

Further out

Ready for lot clearing?

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate