Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Driveways & Roads · Forsyth County · 45 min from Greensboro

Farm Roads for Clemmons & Forsyth County

Lanes you can drive a truck and trailer down in February — cut, ditched, piped and based.

Timber tracts, hunting land and working farms around Clemmons all need access, and most of what we build in Forsyth County is a lane that follows the ground, sheds water and carries weight at the crossings. Free estimates, and we'll flag the route with you.

Entrances off state roads around Clemmons need an NCDOT driveway permit even for a farm lane, and the culvert has to meet their size. We've been through that with enough Forsyth County landowners to tell you what the district office will want.

Long gravel farm road through bare winter woods with mulched edges and the track loader at the far end
Access road through the woods, edges cleared, machine at the top of the hill
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Clemmons ground conditions and how they shape farm roads

The Yadkin floodplain rules and Forsyth County's erosion control program shape how we work here. On the bluffs we mulch rather than scrape and seed every grade the same day, because the sandy clay cuts fast. Down in the bottoms we don't push equipment until summer, and we won't grade anything that changes the flood flow without the owner checking with the county. Sandy ridge ground near Clemmons will carry a machine most of the year, which makes it a good place to schedule winter mulching work.

Around Muddy Creek, Yadkin River and US-158, the properties we're usually called to look like this:

  • Two- to three-acre wooded infill lots off Harper Road and Peace Haven Road that need clearing and a pad before a custom build
  • Inherited farm tracts out Hampton Road and Idols Road being opened up for family home sites
  • Yadkin bluff lots where owners want big oaks kept and the pine and privet mulched out

What farm roads jobs look like around Clemmons

One job we see over and over near US-158: Two- to three-acre wooded infill lots off Harper Road and Peace Haven Road that need clearing and a pad before a custom build. That's textbook farm roads work, and it's usually a one-mobilization job for us.

Out toward the Salem Glen and Bermuda Run area (west) the pattern changes — more Lanes that cross a draw, creek bottom or seasonal wet area. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Clemmons site walk is what the ground needs to do afterward, because that decides how far we take it.

If you're just outside Clemmons — Advance, Lewisville, Wallburg or anywhere between — you're still inside our regular range.

Why Clemmons property owners call A&R

On a Clemmons farm road, Clark is on the machine — veteran, firefighter, owner. He walks the route with you, flags it with you and cuts it himself. There's nobody between you and the operator.

Reach out to A&R Land Services for farm road and access lane work anywhere in Forsyth County — new cuts, reopened logging roads, crossings and entrances.

Farm Roads in Clemmons: questions

Do I need a permit to build a road on my farm?

Interior farm roads on your own land generally don't need a permit, and agricultural and forestry activities have exemptions from some state rules. Where you need to be careful is crossing a stream — buffer rules and sometimes a permit apply — and disturbing more than an acre outside an agricultural exemption. A new entrance on a state road needs an NCDOT driveway permit. We'll walk you through what applies.

How much does it cost to build a farm road?

It comes down to length, how much clearing is in the way, how many crossings need pipe and how much of the road needs stone. A lane across firm, open pasture with no crossings is mostly blade work and costs little per foot. A road cut through timber with two culverts, water bars on a hillside and stone at the crossings costs much more per foot. We quote by section after walking it, so you can see where the money goes. Estimates are free.

How far is A&R Land Services from Clemmons?

We're based in Greensboro, about 45 minutes from Clemmons. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle farm roads near Muddy Creek and Yadkin River?

Yes. We work throughout Clemmons and the surrounding Forsyth County area, including properties around Muddy Creek, Yadkin River and US-158. If you're outside the town limits, send the address and we'll confirm it's in range.

What does farm roads typically involve on a Clemmons property?

Perimeter roads along fence lines and property boundaries is the most common version of it around Clemmons. ABC at the entrance, crossings, soft spots and anywhere the road has to carry weight in the wet. Cut banks seeded and strawed. Drive it with you before we leave. How many sections need stone and how deep is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.

Farm Roads in Clemmons, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate