Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Forsyth County · 45 min from Greensboro

Clemmons Trail Cutting

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

Trail cutting in Clemmons is as much routing as it is clearing. We flag the path with you, follow the contours so it drains, pick the creek crossings where the banks are low, and then mulch the corridor to a clean floor.

Clemmons homesites on bigger lots often have a creek or a bluff at the back that the family's never actually visited. A walking trail down to it is a half-day job that changes how the property gets used.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Clemmons ground conditions and how they shape trail cutting

Clemmons is mostly built out, so the calls we get are for the awkward remaining pieces: wooded two- and three-acre lots off Harper Road, Peace Haven Road and Lewisville-Clemmons Road that were skipped during the first wave of development, estate-style properties toward Tanglewood with steep back lots dropping to Muddy Creek, and the last few farm tracts out Hampton Road and Idols Road where families are building on inherited land. Horse properties are common on the west side near the river.

Around Yadkin River, Harper Road and Lewisville-Clemmons Road, the properties we're usually called to look like this:

  • Horse properties near the Yadkin needing fence lines cleared and paddocks leveled
  • Two- to three-acre wooded infill lots off Harper Road and Peace Haven Road that need clearing and a pad before a custom build
  • Estate properties toward Tanglewood with steep back lots down to Muddy Creek needing selective clearing and erosion control

What trail cutting jobs look like around Clemmons

Most of our trail cutting work in Clemmons comes from two directions. First, horse properties near the Yadkin needing fence lines cleared and paddocks leveled. Second, equipment lanes to back fields, timber and ponds.

Both show up regularly along Lewisville-Clemmons Road and Hampton Road, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.

Neighbors in Lewisville, Mocksville and Advance call us for the same work; Clemmons sits right in the middle of that route.

Why Clemmons property owners call A&R

If the trail needs a culvert at the branch, gravel on the climb, or a wider lane for the tractor on one stretch, we do it in the same Forsyth County trip.

Call or text (336) 392-8138 to set up a free trail cutting estimate in Clemmons. We'll walk the woods with you and flag the route before we quote it.

Trail Cutting in Clemmons: questions

How much does it cost to cut a trail through the woods?

Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.

Do you remove the stumps on the trail?

Stumps inside the corridor get mulched to grade — low enough that they won't catch a tire, a hoof or a boot. On stretches where you want bare dirt for gravel we pull them with the excavator. Most trail customers are fine with mulched stumps and a chip floor.

How far is A&R Land Services from Clemmons?

We're based in Greensboro, about 45 minutes from Clemmons. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near Yadkin River and Harper Road?

Yes. We work throughout Clemmons and the surrounding Forsyth County area, including properties around Yadkin River, Harper Road and Lewisville-Clemmons Road. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach trail cutting on Clemmons ground?

Connecting a house to a creek, pond or picnic spot through the woods is the most common version of it around Clemmons. The mulcher follows the flags, taking brush and saplings to grade and working around the trees you're keeping. Low limbs that would catch a rider get cut. Larger trees on the route get a decision — route around or fell and grapple off. Slope and how much routing work the terrain needs is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.

Trail Cutting in Clemmons, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate