Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Davie County · 50 min from Greensboro

Advance Trail Cutting

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

Wooded land in Advance is a lot more fun with a trail through it. A&R Land Services cuts walking loops, UTV paths and equipment lanes across Davie County with a forestry mulcher, leaving a chip floor you can ride the same day. We're about 50 minutes away in Greensboro.

Nearly every trail we cut in Davie County crosses a creek or a wet-weather branch. On Advance properties we place the crossing where the bottom's firm, keep the clearing narrow inside the buffer, and set stone or a culvert if you'll be driving it in the wet.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Advance ground conditions and how they shape trail cutting

The typical call from Advance is a five- to thirty-acre parcel on Peoples Creek Road, Baltimore Road or Underpass Road that was a family farm and is now being set up as an estate with a long gravel drive, a cleared house site on the high point and pasture for a couple of horses. Bermuda Run and the golf communities bring in understory mulching on wooded lots where the owner wants the privet gone and the hardwoods kept. We also pull out fence rows and reclaim bottom pasture along the Yadkin for landowners who run cattle.

Around NC-801, Cornatzer Road and Tanglewood Park (across the river), the properties we're usually called to look like this:

  • Equestrian properties off NC-801 and Cornatzer Road that need fence lines cleared and a riding area leveled
  • Five- to thirty-acre estate tracts on Peoples Creek Road and Baltimore Road needing a house site cleared, a gravel drive built and pasture reclaimed
  • Wooded golf-community lots near Bermuda Run wanting understory mulched while keeping the mature hardwoods

What trail cutting jobs look like around Advance

Most of our trail cutting work in Advance comes from two directions. First, equestrian properties off NC-801 and Cornatzer Road that need fence lines cleared and a riding area leveled. Second, fire and emergency access through dense acreage.

Both show up regularly along Tanglewood Park (across the river) and Baltimore Road, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.

Neighbors in Mocksville, Lewisville and Winston Salem call us for the same work; Advance sits right in the middle of that route.

Why Advance property owners call A&R

Greensboro to Advance is about 50 minutes, which keeps a half-day trail job worth doing and makes it easy to come back and add a loop or a spur later.

Send us an aerial with the route sketched in and a couple of photos of the woods. We'll give you a real number for cutting it in Advance.

Trail Cutting in Advance: questions

How much does it cost to cut a trail through the woods?

Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.

How wide should an ATV or UTV trail be?

Eight feet is the minimum for a side-by-side to pass comfortably, and ten feet gives you room on turns and lets two riders meet. Walking trails are fine at four to six feet. Equipment access for a tractor or truck wants twelve or more. We cut to the use and keep the turns gentle enough for whatever's riding it.

How far is A&R Land Services from Advance?

We're based in Greensboro, about 50 minutes from Advance. Davie County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near NC-801 and Cornatzer Road?

Yes. We work throughout Advance and the surrounding Davie County area, including properties around NC-801, Cornatzer Road and Tanglewood Park (across the river). If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach trail cutting on Advance ground?

UTV, ATV and dirt bike trails on recreational land is the most common version of it around Advance. The mulcher follows the flags, taking brush and saplings to grade and working around the trees you're keeping. Low limbs that would catch a rider get cut. Larger trees on the route get a decision — route around or fell and grapple off. Trees on the route that need felling and handling is the factor that moves the price most on Davie County jobs, and we'll walk through it with you on site.

Trail Cutting in Advance, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate