If your building kit is on order and the site in Climax isn't ready, we're about 25 minutes away in Greensboro and this is work we do every week. Pads for post-frame barns, metal shops, garages and storage buildings, built to your supplier's footprint.
Many Climax buildings go up with a gravel floor first and a slab a year or two later. We build the pad with that in mind — compacted hard, crusher-run base on top — so the concrete contractor has a ready base when the budget allows.



Climax ground conditions and how they shape pole barn pads
This is still working farm country, so the jobs run bigger: twenty- to one-hundred-acre tracts off NC-22, Climax Road and Old Liberty Road where the owner wants pasture back, a cattle lane cut, a pond-side cleaned up, or a hunting tract opened with lanes and a firebreak. Poultry houses are scattered through here, and we've built pads and access roads for several. Closer to US-421 and the Pleasant Garden line, new houses are going up on five- to ten-acre pieces and need the pine thicket mulched and a drive graded in.
Around Old Liberty Road, Big Alamance Creek and US-421, the properties we're usually called to look like this:
- Poultry farm pads and gravel access roads on the Randolph side
- Five- to ten-acre home sites near US-421 wanting the thicket mulched and a drive graded
- Twenty- to one-hundred-acre cattle and hay farms off NC-22 and Climax Road reclaiming pasture from pine and honeysuckle
What pole barn pads jobs look like around Climax
One job we see over and over near US-421: Poultry farm pads and gravel access roads on the Randolph side. That's textbook pole barn pads work, and it's usually a one-mobilization job for us.
Out toward Deep River the pattern changes — more Metal shop buildings with concrete slabs. The approach is the same, the time on site is what moves.
Either way, the first question we ask on a Climax site walk is what the ground needs to do afterward, because that decides how far we take it.
Neighbors in Greensboro, Liberty and Staley call us for the same work; Climax sits right in the middle of that route.
Why Climax property owners call A&R
Our Climax pad estimates tell you the overbuild, the fill, the stone and the drainage work. If you want to add the driveway or clear more of the lot, it's itemized so you can see the cost.
A&R Land Services builds pads across Guilford County from Greensboro. Reach out about your Climax building.
Pole Barn Pads in Climax: questions
Should the pad be built before or after the posts are set?
Before. The post crew needs a level, compacted pad to lay out on and auger into. If the building gets a slab, that's poured after the posts and walls are up, and we can come back to set the stone base at that stage. Build the pad first either way.
What areas do you build pads in?
Greensboro and all of the Triad, plus roughly an hour and twenty minutes out — Reidsville, Eden, Mount Airy, Elkin, Lexington, Salisbury, Albemarle, Asheboro, Sanford, Burlington, Durham, Chapel Hill and Raleigh.
How far is A&R Land Services from Climax?
We're based in Greensboro, about 25 minutes from Climax. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle pole barn pads near Old Liberty Road and Big Alamance Creek?
Yes. We work throughout Climax and the surrounding Guilford County area, including properties around Old Liberty Road, Big Alamance Creek and US-421. If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach pole barn pads on Climax ground?
RV and boat storage buildings is the most common version of it around Climax. Walk-through with you or the building crew, corners and elevation confirmed, pad ready for posts or concrete. Whether fill balances on site or is trucked in is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.