Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Guilford County · 25 min from Greensboro

Land clearing & site work in Climax, NC

Forestry mulching, lot clearing, grading, driveways, drainage and storm cleanup for Climax property owners, builders and farms — from a veteran and fireman owned crew about 25 minutes away in Greensboro.

Julian Airport RoadPolecat CreekClimax RoadDeep RiverRandleman Lake

What we see on the ground in Climax

Climax is deep in the Carolina slate belt on the Guilford–Randolph line, and the ground is nothing like the red clay around Greensboro. Georgeville and Badin soils dominate — a silty, yellowish-brown clay over slate that's shallow on the ridges and shows rock in every cut. Polecat Creek and Big Alamance Creek start down here, and the Deep River and Randleman Lake are just to the west. Grown-up ground is Virginia pine and loblolly with a sweetgum and sourwood mix, and the old field edges are stitched together with honeysuckle, privet and greenbrier.

This is still working farm country, so the jobs run bigger: twenty- to one-hundred-acre tracts off NC-22, Climax Road and Old Liberty Road where the owner wants pasture back, a cattle lane cut, a pond-side cleaned up, or a hunting tract opened with lanes and a firebreak. Poultry houses are scattered through here, and we've built pads and access roads for several. Closer to US-421 and the Pleasant Garden line, new houses are going up on five- to ten-acre pieces and need the pine thicket mulched and a drive graded in.

The western part of Climax drains to Randleman Lake, a regional water supply, and the lake's watershed rules put buffers on the creeks and limits on impervious surface. On slate ground the problem is runoff, not mud — Georgeville soil sheds water quickly and cuts gullies on a bare slope within one storm. So we seed and straw grades immediately and leave mulch in place on the slopes. Rock close to the surface means we scope grading jobs carefully; sometimes a pad has to be built up rather than cut down. The ridges carry equipment most of the year.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept
Cleared strip along a wooded property line next to a mowed lawn after brush was mulched
Property-line strip opened up along the lawn edge

Properties we work around Climax

  • Twenty- to one-hundred-acre cattle and hay farms off NC-22 and Climax Road reclaiming pasture from pine and honeysuckle
  • Poultry farm pads and gravel access roads on the Randolph side
  • Hunting tracts needing shooting lanes, trails and firebreaks cut through Virginia pine
  • Five- to ten-acre home sites near US-421 wanting the thicket mulched and a drive graded
  • Pond banks and creek edges on old farms that have grown up in sweetgum and privet

Most-requested services in Climax

Climax questions

Do you serve Climax, NC?

Yes. Climax is about 25 minutes from our Greensboro base and well inside the territory we work every week, along with the rest of Guilford County.

What kind of land work do you do most in Climax?

pasture reclamation, forestry mulching, hunting land prep, firebreaks and related site work. Twenty- to one-hundred-acre cattle and hay farms off NC-22 and Climax Road reclaiming pasture from pine and honeysuckle.

Is there a travel charge for Climax?

No separate travel charge — Climax is close enough that mobilization is already built into normal pricing.

Do you work near Julian Airport Road and Polecat Creek?

Yes — we've worked around Julian Airport Road, Polecat Creek, Climax Road and across the Climax area. If your property is outside the town limits, send the address and we'll confirm.

Do you need a permit to clear land in Guilford County?

For most residential clearing on your own lot, no. Disturbing more than an acre triggers North Carolina's sediment and erosion control rules, and work inside stream buffers or in towns with tree-protection ordinances may need approval. We'll flag any of that during the site walk and point you to the right Guilford County office.

Climax property that needs opening up?

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate