If you're building in Climax and the lot has been cleared, the pad is the next step. We're about 25 minutes away in Greensboro, and we build pads to the builder's finished floor elevation with the fill compacted properly, because loose Guilford County clay is the main reason foundations here move.
Metal building and pole barn pads are a steady part of our Climax work. Those slabs are big and thin, which makes them sensitive to settlement, so the pad under them has to be uniformly compacted edge to edge. We build them with the overbuild the slab crew needs and check them with a laser.



Climax ground conditions and how they shape building pads
Climax is deep in the Carolina slate belt on the Guilford–Randolph line, and the ground is nothing like the red clay around Greensboro. Georgeville and Badin soils dominate — a silty, yellowish-brown clay over slate that's shallow on the ridges and shows rock in every cut. Polecat Creek and Big Alamance Creek start down here, and the Deep River and Randleman Lake are just to the west. Grown-up ground is Virginia pine and loblolly with a sweetgum and sourwood mix, and the old field edges are stitched together with honeysuckle, privet and greenbrier.
Around Polecat Creek, Julian Airport Road and Old Liberty Road, the properties we're usually called to look like this:
- Twenty- to one-hundred-acre cattle and hay farms off NC-22 and Climax Road reclaiming pasture from pine and honeysuckle
- Hunting tracts needing shooting lanes, trails and firebreaks cut through Virginia pine
- Pond banks and creek edges on old farms that have grown up in sweetgum and privet
What building pads jobs look like around Climax
Most of our building pads work in Climax comes from two directions. First, twenty- to one-hundred-acre cattle and hay farms off NC-22 and Climax Road reclaiming pasture from pine and honeysuckle. Second, new home sites on crawl space, slab or basement foundations.
Both show up regularly along Old Liberty Road and Deep River, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.
Randleman, Asheboro and Staley are in the same loop as Climax for us — same crew, same pricing basis.
Why Climax property owners call A&R
We'll tell you up front whether your Climax pad needs engineered fill and geotech testing. We're not a general contractor or an engineer; we're the dirt crew, and we'd rather set you up right than have you find out later.
A&R Land Services is about 25 minutes from Climax. Reach out and we'll get your Guilford County pad built before the footings are due.
Building Pads in Climax: questions
Do building pads need to be compacted?
Yes, and it's the whole point. Loose clay settles for years, and anything built on it moves with it. We place fill in thin lifts and compact each one with the machine as it goes down. For slabs, steel buildings and anything with an engineered foundation, your builder may require tested density, and we work to the geotech's spec and coordinate their inspections.
Do you need a permit to build a pad?
The pad itself usually falls under your building permit, which the builder or the owner pulls through the county inspections office. If the total disturbed area on the lot goes over an acre, a state sediment and erosion control plan is required too. We'll help you figure out which applies before we start.
How far is A&R Land Services from Climax?
We're based in Greensboro, about 25 minutes from Climax. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle building pads near Polecat Creek and Julian Airport Road?
Yes. We work throughout Climax and the surrounding Guilford County area, including properties around Polecat Creek, Julian Airport Road and Old Liberty Road. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a building pads job in Guilford County?
Concrete slabs for equipment sheds, carports and patios is the most common version of it around Climax. Fill placed in six-to-eight-inch layers and tracked in before the next goes on. Geotech density testing coordinated between lifts if the project requires it. Access for equipment and trucks is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.