Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Guilford / Randolph County · 25 min from Greensboro

Julian Building Pads

A level, compacted pad your foundation crew can trust.

Building pad work in Julian is where we spend a lot of our time, usually working directly with a builder or a metal building dealer. We stake the footprint, strip the organics, build the fill in thin compacted lifts and hand off a pad that's where the plan says it is.

Where a geotech is involved on a Julian project, we schedule their density tests between lifts rather than at the end. It's easier to fix a lift that fails than to tear down a finished pad, and it keeps the builder's timeline intact.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Julian ground conditions and how they shape building pads

The land around Julian is bigger and more rural than anything closer to Greensboro — thirty-, fifty-, one-hundred-acre tracts off NC-62, Julian Road and Liberty Road that are a mix of cattle farms, old tobacco ground, timber and hunting land. We get hired to reclaim pasture that pine has taken over, cut farm roads and lanes to back fields, open up food plots and shooting lanes, and clear house sites for family members building on a corner of the home tract. Horse properties have been coming in along NC-62 too, with the same fence-line and pasture needs.

Around Stinking Quarter Creek, Kimesville Road and Alamance Church Road, the properties we're usually called to look like this:

  • Family home sites carved off the corner of a home tract, with a drive cut and a perc area cleared
  • Horse properties along NC-62 needing fence lines mulched and paddocks leveled
  • Hunting and timber land needing food plot edges, shooting lanes and farm roads

What building pads jobs look like around Julian

If you're near Alamance Church Road or Old Julian Road, odds are your situation is one we've already worked: family home sites carved off the corner of a home tract, with a drive cut and a perc area cleared, or metal buildings, pole barns, workshops and detached garages.

The building pads approach for Guilford / Randolph County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

We also cover building pads in Climax, Liberty and Burlington, so if you've got property in more than one spot we can often batch the work.

Why Julian property owners call A&R

The pad under your Julian building is built by the owner. Clark is a veteran and a working firefighter, and he runs the machine, reads the plan and sets the laser himself.

Building in Julian? Contact A&R Land Services for a compacted, laser-leveled pad anywhere in Guilford / Randolph County.

Building Pads in Julian: questions

How much does it cost to build a house pad in NC?

The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.

How high should a building pad be above grade?

High enough that water runs off it in every direction. A few inches above surrounding grade with a slight crown is typical for a crawl space home; a slab pad gets set a specific depth below finished floor so the stone and concrete land at the right height. Your builder's finished floor elevation is the number we grade to.

How far is A&R Land Services from Julian?

We're based in Greensboro, about 25 minutes from Julian. Guilford / Randolph County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near Stinking Quarter Creek and Kimesville Road?

Yes. We work throughout Julian and the surrounding Guilford / Randolph County area, including properties around Stinking Quarter Creek, Kimesville Road and Alamance Church Road. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach building pads on Julian ground?

Additions where the new footprint sits on unprepared ground is the most common version of it around Julian. Top of pad set to elevation with the laser, crowned or sloped so water runs off, and the surrounding ground graded to carry it away from the footing line. Soil moisture and season is the factor that moves the price most on Guilford / Randolph County jobs, and we'll walk through it with you on site.

Building Pads in Julian, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate