A&R Land Services cuts new access lanes and rebuilds old ones in Denton. We're about 1 hour from Denton, close enough to walk the route with you, build it in a few days and come back when the timber crew needs the crossing widened.
Farm ground around Denton is rolling Piedmont with clay that's firm in dry weather and soft in wet, cut by draws and small branches every few hundred yards. A farm road in Davidson County that doesn't pipe the draws and drain the hillsides is a road for half the year. We build them for all twelve months.



Denton ground conditions and how they shape farm roads
The two jobs we get most around Denton are lake lots and hunting land. High Rock and Tuckertown lot owners at Healing Springs, Jackson Hill and along NC-47 want a steep, rocky bank thinned out so they can get to the water and see it from the house. Hunting clubs and families on the big timber tracts toward Handy, Silver Hill and the Montgomery County line need lanes cut, plots opened, and old logging roads graded so a truck can get in. The farms that are left on NC-109 and NC-49 call for pasture reclamation and poultry house pads, and Denton FarmPark-area properties want fence rows cleaned up.
Around Denton FarmPark, Flat Swamp Creek and the Uwharrie foothills, the properties we're usually called to look like this:
- High Rock and Tuckertown lake lots at Healing Springs, Jackson Hill and along NC-47 with steep, rocky banks to thin for access and a view
- Cabin and retirement home sites on Uwharrie hillside parcels where rock makes mulching the only sensible approach
- Remaining farms on NC-109 and NC-49 needing pasture reclaimed from pine and poultry house pads cut
What farm roads jobs look like around Denton
Most of our farm roads work in Denton comes from two directions. First, high Rock and Tuckertown lake lots at Healing Springs, Jackson Hill and along NC-47 with steep, rocky banks to thin for access and a view. Second, hunting land access and roads to stands and food plots.
Both show up regularly along the Uwharrie foothills and Jackson Hill, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.
Albemarle, Seagrove and Troy are in the same loop as Denton for us — same crew, same pricing basis.
Why Denton property owners call A&R
We build drainage into the road instead of adding it later. Crown, outslope, ditches, water bars, pipe at every crossing — that's what makes a Davidson County farm lane survive winter without a stone base the whole length.
Send us a plat or an aerial of your Denton land with the route marked and we'll come walk it. Free estimates, practical answers.
Farm Roads in Denton: questions
Do farm roads need gravel the whole length?
Usually not. Firm, well-drained Piedmont clay with a proper crown and ditches will carry a tractor and a pickup most of the year without stone. Stone goes where the road sees the most traffic and the most water — the entrance, crossings and wet spots — and on the full length only if the road has to carry heavy trucks through the winter.
What areas do you build farm roads in?
Out of Greensboro, we cover the Triad and about an hour and twenty minutes in every direction — up to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Farm and timber country in every one of those directions is where this work is.
How far is A&R Land Services from Denton?
We're based in Greensboro, about 1 hour from Denton. Davidson County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle farm roads near Denton FarmPark and Flat Swamp Creek?
Yes. We work throughout Denton and the surrounding Davidson County area, including properties around Denton FarmPark, Flat Swamp Creek and the Uwharrie foothills. If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach farm roads on Denton ground?
Interior farm roads that have to carry trucks, trailers and equipment year-round is the most common version of it around Denton. Mulch the route, pull stumps and blowdowns, cut the roadbed to grade with crown or outslope, and shape the ditches. Water bars go in on the steep sections. Number and size of culverts at crossings is the factor that moves the price most on Davidson County jobs, and we'll walk through it with you on site.