Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Davidson County · 1 hr from Greensboro

Trail Cutting for Denton & Davidson County

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

If you can't get to the back of your Denton property without a machete, we'll cut the route. Veteran and fireman owned, based in Greensboro, and trail work on Davidson County recreational land is some of the most enjoyable work we do.

Hunting tracts around Denton want trails that get you to the stand without walking through the bedding cover. We route those with the wind and the terrain in mind and keep the corridor just wide enough for a quiet walk or a UTV.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Denton ground conditions and how they shape trail cutting

This is the rockiest ground we work, and we plan every Denton job around it. Dozers and root rakes find slate within a foot on most hillsides, so forestry mulching is the default and grubbing is reserved for building footprints. Cid flats stay wet into April. High Rock Lake's shoreline program and the county erosion office both watch the lake lots, so slopes get mulched with a buffer strip left at the water. The ridges dry fast and can be worked most of the winter.

Around High Rock Lake, Lick Creek and Healing Springs, the properties we're usually called to look like this:

  • Hunting tracts toward Handy, Silver Hill and the Montgomery County line needing lanes, food plots and old logging roads graded
  • Fence rows and pond banks around Denton FarmPark-area farms grown up in cedar and privet
  • Remaining farms on NC-109 and NC-49 needing pasture reclaimed from pine and poultry house pads cut

What trail cutting jobs look like around Denton

One job we see over and over near Healing Springs: Hunting tracts toward Handy, Silver Hill and the Montgomery County line needing lanes, food plots and old logging roads graded. That's textbook trail cutting work, and it's usually a one-mobilization job for us.

Out toward NC-47 the pattern changes — more Horse trails and riding paths on farm property. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Denton site walk is what the ground needs to do afterward, because that decides how far we take it.

We also cover trail cutting in Thomasville, Asheboro and Lexington, so if you've got property in more than one spot we can often batch the work.

Why Denton property owners call A&R

A mulched trail in Denton is clean from day one — no windrow of brush along the edge, no stumps standing up, no burn pile smoldering by the path. Just a corridor through the woods with a chip floor.

Trail cutting in Davidson County starts with a walk through the woods. Get in touch and let's lay it out.

Trail Cutting in Denton: questions

How much does it cost to cut a trail through the woods?

Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.

Will the trail turn into mud?

Not if it's routed right. A trail that runs straight down a slope on Piedmont clay becomes a gully; one that follows the contour and crosses slopes at an angle sheds water. We route for drainage, keep the mulch layer on the path, and put gravel on any stretch that's going to be wet no matter what — usually creek approaches and the bottom of climbs.

How far is A&R Land Services from Denton?

We're based in Greensboro, about 1 hour from Denton. Davidson County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near High Rock Lake and Lick Creek?

Yes. We work throughout Denton and the surrounding Davidson County area, including properties around High Rock Lake, Lick Creek and Healing Springs. If you're outside the town limits, send the address and we'll confirm it's in range.

What does trail cutting typically involve on a Denton property?

Fire and emergency access through dense acreage is the most common version of it around Denton. We walk or ride the trail end to end before we leave. If a turn is tight or a stub stands up, it gets fixed on the spot. Creek and wet crossings and whether they get stone or a culvert is the factor that moves the price most on Davidson County jobs, and we'll walk through it with you on site.

Trail Cutting in Denton, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate