Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Davidson County · 30 min from Greensboro

Trail Cutting for Thomasville & Davidson County

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

Wooded land in Thomasville is a lot more fun with a trail through it. A&R Land Services cuts walking loops, UTV paths and equipment lanes across Davidson County with a forestry mulcher, leaving a chip floor you can ride the same day. We're about 30 minutes away in Greensboro.

Nearly every trail we cut in Davidson County crosses a creek or a wet-weather branch. On Thomasville properties we place the crossing where the bottom's firm, keep the clearing narrow inside the buffer, and set stone or a culvert if you'll be driving it in the wet.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Thomasville ground conditions and how they shape trail cutting

Iredell and Enon clay is the thing to respect here. It stays saturated for weeks after a wet spell, heaves when it freezes, and a pad graded on it in February will move. We wait for dry ground on those soils and build pads in compacted lifts with drainage figured in. Anything draining toward Lake Thom-A-Lex falls under watershed rules and the county erosion office is strict about it; the Hamby Creek and Rich Fork corridors have buffers too. Ridge lots on Cecil ground can be worked year-round if it has been dry a few days.

Around Pilot, Fairgrove and Kennedy Road, the properties we're usually called to look like this:

  • Vacant furniture-era industrial parcels along Julian Avenue and the railroad being cleared and rough graded for resale
  • Horse properties around Fairgrove needing pasture reclaimed and riding trails cut
  • Infill lots in the older mill neighborhoods inside the city that have grown up in sweetgum and privet

What trail cutting jobs look like around Thomasville

One job we see over and over near Kennedy Road: Vacant furniture-era industrial parcels along Julian Avenue and the railroad being cleared and rough graded for resale. That's textbook trail cutting work, and it's usually a one-mobilization job for us.

Out toward I-85 the pattern changes — more Walking and running loops on wooded homesites. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Thomasville site walk is what the ground needs to do afterward, because that decides how far we take it.

We also cover trail cutting in High Point, Archdale and Welcome, so if you've got property in more than one spot we can often batch the work.

Why Thomasville property owners call A&R

Greensboro to Thomasville is about 30 minutes, which keeps a half-day trail job worth doing and makes it easy to come back and add a loop or a spur later.

Send us an aerial with the route sketched in and a couple of photos of the woods. We'll give you a real number for cutting it in Thomasville.

Trail Cutting in Thomasville: questions

How much does it cost to cut a trail through the woods?

Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.

Do you remove the stumps on the trail?

Stumps inside the corridor get mulched to grade — low enough that they won't catch a tire, a hoof or a boot. On stretches where you want bare dirt for gravel we pull them with the excavator. Most trail customers are fine with mulched stumps and a chip floor.

How far is A&R Land Services from Thomasville?

We're based in Greensboro, about 30 minutes from Thomasville. Davidson County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near Pilot and Fairgrove?

Yes. We work throughout Thomasville and the surrounding Davidson County area, including properties around Pilot, Fairgrove and Kennedy Road. If you're outside the town limits, send the address and we'll confirm it's in range.

What does trail cutting typically involve on a Thomasville property?

Access routes to deer stands, food plots and hunting blinds is the most common version of it around Thomasville. We walk or ride the trail end to end before we leave. If a turn is tight or a stub stands up, it gets fixed on the spot. Access to the start of the trail from where we can unload is the factor that moves the price most on Davidson County jobs, and we'll walk through it with you on site.

Trail Cutting in Thomasville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate