A&R Land Services cuts new access lanes and rebuilds old ones in Elon. We're about 22 minutes from Elon, close enough to walk the route with you, build it in a few days and come back when the timber crew needs the crossing widened.
Farm ground around Elon is rolling Piedmont with clay that's firm in dry weather and soft in wet, cut by draws and small branches every few hundred yards. A farm road in Alamance County that doesn't pipe the draws and drain the hillsides is a road for half the year. We build them for all twelve months.



Elon ground conditions and how they shape farm roads
The Haw River corridor and the Lake Burlington and Lake Cammack watersheds carry buffer and impervious-surface rules, so we keep mulch on the slopes and stay off the stream banks. Alamance County erosion control permits apply past an acre outside the town limits. Cecil ground here is reliable most of the year; the Enon pockets near Travis Creek need a dry spell before we grade them. Storm cleanup is common after summer thunderstorms drop pines in the neighborhoods west of campus.
Around Elon University, Lake Cammack and Lake Burlington, the properties we're usually called to look like this:
- Subdivision yards with storm-dropped pines needing cleanup and clearing
- Haw River frontage lots inside the watershed buffers needing selective clearing
- Hay and cattle farms north toward Altamahaw and Ossipee reclaiming pasture and fence lines
What farm roads jobs look like around Elon
Around Lake Burlington, the properties that call us for farm roads tend to be subdivision yards with storm-dropped pines needing cleanup and clearing.
Closer to Shallowford Church Road it's more often hunting land access and roads to stands and food plots — different layout, same machine, and the estimate reflects the difference honestly.
Elon isn't one kind of ground, and we don't price it like it is.
Burlington, Gibsonville and Graham are in the same loop as Elon for us — same crew, same pricing basis.
Why Elon property owners call A&R
We build drainage into the road instead of adding it later. Crown, outslope, ditches, water bars, pipe at every crossing — that's what makes a Alamance County farm lane survive winter without a stone base the whole length.
Send us a plat or an aerial of your Elon land with the route marked and we'll come walk it. Free estimates, practical answers.
Farm Roads in Elon: questions
Do farm roads need gravel the whole length?
Usually not. Firm, well-drained Piedmont clay with a proper crown and ditches will carry a tractor and a pickup most of the year without stone. Stone goes where the road sees the most traffic and the most water — the entrance, crossings and wet spots — and on the full length only if the road has to carry heavy trucks through the winter.
Do I need a permit to build a road on my farm?
Interior farm roads on your own land generally don't need a permit, and agricultural and forestry activities have exemptions from some state rules. Where you need to be careful is crossing a stream — buffer rules and sometimes a permit apply — and disturbing more than an acre outside an agricultural exemption. A new entrance on a state road needs an NCDOT driveway permit. We'll walk you through what applies.
How far is A&R Land Services from Elon?
We're based in Greensboro, about 22 minutes from Elon. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle farm roads near Elon University and Lake Cammack?
Yes. We work throughout Elon and the surrounding Alamance County area, including properties around Elon University, Lake Cammack and Lake Burlington. If you're outside the town limits, send the address and we'll confirm it's in range.
What does farm roads typically involve on a Elon property?
Interior farm roads that have to carry trucks, trailers and equipment year-round is the most common version of it around Elon. Clearing, grading, culverts, water bars, stone by section, and seed on the cut banks. Written and priced by section so you can phase it if you want. Number and size of culverts at crossings is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.