Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Driveways & Roads · Alamance County · 32 min from Greensboro

Farm Roads for Haw River & Alamance County

Lanes you can drive a truck and trailer down in February — cut, ditched, piped and based.

A&R Land Services cuts new access lanes and rebuilds old ones in Haw River. We're about 32 minutes from Haw River, close enough to walk the route with you, build it in a few days and come back when the timber crew needs the crossing widened.

Farm ground around Haw River is rolling Piedmont with clay that's firm in dry weather and soft in wet, cut by draws and small branches every few hundred yards. A farm road in Alamance County that doesn't pipe the draws and drain the hillsides is a road for half the year. We build them for all twelve months.

Long gravel farm road through bare winter woods with mulched edges and the track loader at the far end
Access road through the woods, edges cleared, machine at the top of the hill
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Haw River ground conditions and how they shape farm roads

The river floodplain is the big constraint — anything in it is subject to flood rules, and we don't grade in the bottoms without the owner confirming what's allowed. Iredell clay on the terraces has to be dry to grade and ruts badly when it's not. Alamance County erosion control covers disturbance past an acre, and Haw River stream buffers apply along the river and its creeks. Invasive removal along the banks is best done in late summer when kudzu and knotweed are fully up and the crowns are easy to find.

Around Haw Creek, Main Street and I-40 / I-85, the properties we're usually called to look like this:

  • Commercial and warehouse tracts along I-40/I-85 on the south side needing clearing and rough grading
  • Riverbank parcels needing invasive removal and trail cutting within the buffer rules
  • Thirty- to one-hundred-acre farms along NC-49 and Trollingwood-Hawfields Road reclaiming pasture and fence rows

What farm roads jobs look like around Haw River

Around I-40 / I-85, the properties that call us for farm roads tend to be commercial and warehouse tracts along I-40/I-85 on the south side needing clearing and rough grading.

Closer to Trollingwood-Hawfields Road it's more often access lanes from the road to back fields, barns and ponds — different layout, same machine, and the estimate reflects the difference honestly.

Haw River isn't one kind of ground, and we don't price it like it is.

We also cover farm roads in Mebane, Burlington and Saxapahaw, so if you've got property in more than one spot we can often batch the work.

Why Haw River property owners call A&R

We build drainage into the road instead of adding it later. Crown, outslope, ditches, water bars, pipe at every crossing — that's what makes a Alamance County farm lane survive winter without a stone base the whole length.

Send us a plat or an aerial of your Haw River land with the route marked and we'll come walk it. Free estimates, practical answers.

Farm Roads in Haw River: questions

Can you reopen an old logging road?

Yes, and it's one of our favorite jobs. The grade and the crossings are already there under the growth. We mulch the lane open, pull the blowdowns and stumps, clean or replace the old culverts, regrade and put water bars back on the steep sections. It's almost always cheaper than cutting a new road.

Do farm roads need gravel the whole length?

Usually not. Firm, well-drained Piedmont clay with a proper crown and ditches will carry a tractor and a pickup most of the year without stone. Stone goes where the road sees the most traffic and the most water — the entrance, crossings and wet spots — and on the full length only if the road has to carry heavy trucks through the winter.

How far is A&R Land Services from Haw River?

We're based in Greensboro, about 32 minutes from Haw River. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle farm roads near Haw Creek and Main Street?

Yes. We work throughout Haw River and the surrounding Alamance County area, including properties around Haw Creek, Main Street and I-40 / I-85. If you're outside the town limits, send the address and we'll confirm it's in range.

What does farm roads typically involve on a Haw River property?

Haul roads for timber sales and firewood cutting is the most common version of it around Haw River. Clearing, grading, culverts, water bars, stone by section, and seed on the cut banks. Written and priced by section so you can phase it if you want. Haul distance for stone and distance from Greensboro is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Farm Roads in Haw River, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate