A&R manages hunting ground in Haw River the way a hunter would: lanes cut from the seat's perspective, access routed downwind of the bedding, plots shaped so the approach is hidden. The mulcher leaves it all floored with chips so you can walk in quiet.
Leased tracts in Alamance County usually allow lanes and plots but not timber cutting. On Haw River leases we work inside the mulcher's range, leave the marketable trees standing, and keep the scope within what the landowner signed off on.



Haw River ground conditions and how they shape hunting land prep
The river floodplain is the big constraint — anything in it is subject to flood rules, and we don't grade in the bottoms without the owner confirming what's allowed. Iredell clay on the terraces has to be dry to grade and ruts badly when it's not. Alamance County erosion control covers disturbance past an acre, and Haw River stream buffers apply along the river and its creeks. Invasive removal along the banks is best done in late summer when kudzu and knotweed are fully up and the crowns are easy to find.
Around Lang Street, Red Slide Park and Stony Creek, the properties we're usually called to look like this:
- Mill-village and former industrial lots along the river and rail line overgrown with kudzu, privet and volunteer trees
- Commercial and warehouse tracts along I-40/I-85 on the south side needing clearing and rough grading
- Thirty- to one-hundred-acre farms along NC-49 and Trollingwood-Hawfields Road reclaiming pasture and fence rows
What hunting land prep jobs look like around Haw River
If you're near Stony Creek or the Haw River Trail, odds are your situation is one we've already worked: mill-village and former industrial lots along the river and rail line overgrown with kudzu, privet and volunteer trees, or rifle and bow stands that need lanes cut or reopened.
The hunting land prep approach for Alamance County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.
If you're just outside Haw River — Burlington, Elon, Graham or anywhere between — you're still inside our regular range.
Why Haw River property owners call A&R
The man on the mulcher hunts. Clark is a veteran, a working firefighter and the owner, and on Haw River tracts he lays out lanes and plots the way he'd do it on his own ground — from the stand, with the wind in mind.
Get your Haw River tract ready for the season. Reach out to A&R Land Services for hunting land work anywhere in Alamance County.
Hunting Land Prep in Haw River: questions
When is the best time to cut shooting lanes in NC?
Late winter through spring, after the season closes. The lanes have months to blend in before opening day, the deer aren't being pressured, and you can see the ground to lay them out. If you want a fresh trim before the season, early September is the latest we'd suggest — any closer to opening and you're putting fresh disturbance right where you'll be hunting.
Do you remove stumps from food plots?
If you're going to disc or drill the plot, yes — stumps catch equipment and cost you a disc blade. We cut them flush with the mulcher or pull them with the excavator depending on the size. If you're going to broadcast seed and drag, mulched stumps at grade are usually fine and cost less.
How far is A&R Land Services from Haw River?
We're based in Greensboro, about 32 minutes from Haw River. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle hunting land prep near Lang Street and Red Slide Park?
Yes. We work throughout Haw River and the surrounding Alamance County area, including properties around Lang Street, Red Slide Park and Stony Creek. If you're outside the town limits, send the address and we'll confirm it's in range.
What does hunting land prep typically involve on a Haw River property?
Stand access trails routed for wind and quiet is the most common version of it around Haw River. The mulcher cuts the lanes, opens the plots and clears the trails, working around the cover you want left. Stumps in the plots get cut flush or pulled if you'll be discing. Edges get shaped to thicken or open as planned. Number of stands and the total length of lanes being cut is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.