Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Alamance County · 32 min from Greensboro

Haw River Trail Cutting

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

A&R cuts trails through Alamance County woods without a pile of brush beside the path or a burn permit. The mulcher grinds the corridor to chips, the roots hold the clay, and your Haw River trail is walkable before the trailer's hooked up.

Red clay climbs in Alamance County woods get slick under ATV tires. We put the climbs where the ground is firmest, angle them across the slope, and gravel the ones that are going to be wet regardless.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Haw River ground conditions and how they shape trail cutting

Work in Haw River comes from a few directions. Old mill-village lots and former industrial ground along the river and the rail line need brush, kudzu and volunteer trees cleared before anybody can use them. The I-40/I-85 corridor on the south side of town has been drawing warehouse and commercial development that needs tracts cleared and rough graded. And north and east along NC-49, Stone Street and Trollingwood-Hawfields Road there are still thirty- to one-hundred-acre farms where owners want pasture back, lanes cut and fence rows opened.

Around Haw River, Stony Creek and Haw Creek, the properties we're usually called to look like this:

  • Mill-village and former industrial lots along the river and rail line overgrown with kudzu, privet and volunteer trees
  • Commercial and warehouse tracts along I-40/I-85 on the south side needing clearing and rough grading
  • Iredell clay terraces with standing water needing swales and ditching

What trail cutting jobs look like around Haw River

One job we see over and over near Haw Creek: Mill-village and former industrial lots along the river and rail line overgrown with kudzu, privet and volunteer trees. That's textbook trail cutting work, and it's usually a one-mobilization job for us.

Out toward I-40 / I-85 the pattern changes — more Connecting a house to a creek, pond or picnic spot through the woods. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Haw River site walk is what the ground needs to do afterward, because that decides how far we take it.

If you're just outside Haw River — Elon, Snow Camp, Burlington or anywhere between — you're still inside our regular range.

Why Haw River property owners call A&R

The owner cuts every Haw River trail himself. Clark is a veteran and a working firefighter, and he's laid out enough routes through Alamance County woods to know where a trail will hold and where it'll wash.

Open up your Haw River property. Reach out to A&R Land Services for trail and access path cutting anywhere in Alamance County.

Trail Cutting in Haw River: questions

Can you cut a trail across a creek?

Yes. We pick the crossing where the banks are low and the bottom is firm, keep the clearing narrow inside the buffer, and either set stone for a ford or install a culvert with fill over it, depending on how much water runs and how often you need to cross it in the wet. The excavator and the dump trailer handle it on the same visit.

What areas do you cut trails in?

Greensboro and roughly an hour and twenty minutes out — the Triad, north to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Most of our trail work is on recreational and hunting land in the rural counties around that ring.

How far is A&R Land Services from Haw River?

We're based in Greensboro, about 32 minutes from Haw River. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near Haw River and Stony Creek?

Yes. We work throughout Haw River and the surrounding Alamance County area, including properties around Haw River, Stony Creek and Haw Creek. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach trail cutting on Haw River ground?

Walking and running loops on wooded homesites is the most common version of it around Haw River. We walk or ride the trail end to end before we leave. If a turn is tight or a stub stands up, it gets fixed on the spot. Gravel on climbs, wet stretches or the whole trail is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Trail Cutting in Haw River, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate