Rural roads around Haw River have thousands of driveway culverts and a good share of them are crushed, rusted or silted shut. We replace them with properly sized HDPE or concrete pipe, bedded in stone, with the ends finished so they don't wash. Free estimates anywhere in Alamance County.
The red clay around Haw River erodes fast at a pipe end. Every culvert we set in Alamance County gets riprap or a headwall at the inlet and outlet and a reshaped ditch on both sides, so the water goes through the pipe instead of around it.



Haw River ground conditions and how they shape culverts
Work in Haw River comes from a few directions. Old mill-village lots and former industrial ground along the river and the rail line need brush, kudzu and volunteer trees cleared before anybody can use them. The I-40/I-85 corridor on the south side of town has been drawing warehouse and commercial development that needs tracts cleared and rough graded. And north and east along NC-49, Stone Street and Trollingwood-Hawfields Road there are still thirty- to one-hundred-acre farms where owners want pasture back, lanes cut and fence rows opened.
Around the Trollingwood community, NC-49 and Stone Street, the properties we're usually called to look like this:
- Iredell clay terraces with standing water needing swales and ditching
- Riverbank parcels needing invasive removal and trail cutting within the buffer rules
- Thirty- to one-hundred-acre farms along NC-49 and Trollingwood-Hawfields Road reclaiming pasture and fence rows
What culverts jobs look like around Haw River
Most of our culverts work in Haw River comes from two directions. First, iredell clay terraces with standing water needing swales and ditching. Second, entrances that flood or wash out every big storm.
Both show up regularly along Stone Street and Lang Street, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.
We also cover culverts in Graham, Burlington and Mebane, so if you've got property in more than one spot we can often batch the work.
Why Haw River property owners call A&R
On a Haw River culvert job, Clark is the one on the excavator — veteran, firefighter, owner. He's set enough driveway pipe in Alamance County to know what washes out and what doesn't, and he builds yours in the second category.
Putting in a new entrance on a Haw River property? Reach out to A&R Land Services before you call NCDOT — we'll walk you through the permit and the pipe size, and we install culverts all over Alamance County.
Culverts in Haw River: questions
How much does it cost to install a driveway culvert in NC?
The main drivers are pipe size and length, whether an old pipe has to come out, and how much stone the backfill and end treatments take. A short 15-inch HDPE pipe on a private drive is a half-day job. A 24-inch, 40-foot pipe on a state road with riprap ends and a full ditch reshape is a bigger day with a lot more material. We give a free written estimate after seeing the site.
Do I need a permit to put a culvert in my driveway?
If your driveway connects to a state-maintained road, yes — NCDOT requires a driveway permit for a new entrance or a changed one, and the district office will specify the pipe size and length. There's generally no state permit for culverts on private roads or interior farm lanes, though stream crossings can trigger buffer rules. We'll tell you which situation you're in.
How far is A&R Land Services from Haw River?
We're based in Greensboro, about 32 minutes from Haw River. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle culverts near the Trollingwood community and NC-49?
Yes. We work throughout Haw River and the surrounding Alamance County area, including properties around the Trollingwood community, NC-49 and Stone Street. If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach culverts on Haw River ground?
Long driveways that cross a low spot or seasonal stream is the most common version of it around Haw River. 811 marks come first. Then the mini excavator removes the old pipe or cuts the new trench to grade, matching the fall of the ditch so water doesn't pond at the inlet. Material: HDPE, corrugated metal or reinforced concrete is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.