Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Drainage & Erosion · Alamance County · 25 min from Greensboro

Culverts for Burlington & Alamance County

Driveway pipe sized to the water, set to grade, bedded in stone — no more washed-out entrance.

A&R Land Services installs culverts and driveway pipe in Burlington — state road entrances, private drives, farm lanes and ditch crossings. We're only about 25 minutes from Burlington, which keeps the mobilization cost down on what's usually a one-day job.

Most of the Burlington culvert jobs we do are on state-maintained secondary roads, where NCDOT sets the minimum pipe size and length through the driveway permit. We'll tell you what to expect from the district office and we build the entrance to meet it, because an entrance that doesn't pass inspection is one you'll be paying for twice.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Burlington ground conditions and how they shape culverts

Iredell clay rules the schedule. It's slick as grease when wet, cracks open in August, and will not grade cleanly until it's had a dry week. We watch the forecast and run track machines on it. Drainage work — swales, French drains, ditch cleaning — is a bigger share of the job in Burlington than anywhere else we work. Both city lakes are water supply, so the watershed overlays require buffers and limit impervious cover, and Alamance County erosion control covers disturbance past an acre outside city limits.

Around Big Alamance Creek, I-40 / I-85 and Haw River, the properties we're usually called to look like this:

  • Five- to twenty-acre rural lots north toward Lake Cammack and south toward Lake Mackintosh opening house sites and pasture
  • Commercial tracts along the I-40/I-85 corridor near University Drive needing clearing and rough grading
  • Church and school properties with wooded land they want opened for expansion or parking

What culverts jobs look like around Burlington

A typical Burlington call for culverts looks like this: Five- to twenty-acre rural lots north toward Lake Cammack and south toward Lake Mackintosh opening house sites and pasture. We've handled that exact situation around Haw River and Alamance Regional Medical Center more times than we can count.

The other common one is New driveway entrances on state roads and private roads, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

If you're just outside Burlington — Elon, Greensboro, Saxapahaw or anywhere between — you're still inside our regular range.

Why Burlington property owners call A&R

We handle the permit question up front. If your Burlington driveway is on a state road, we'll tell you what NCDOT is going to require before we quote, so there's no surprise about pipe size or length after the fact.

Send us a photo of the ends of your Burlington driveway pipe and we'll tell you whether it's crushed, undersized or just silted shut before we schedule the visit.

Culverts in Burlington: questions

Do I need a permit to put a culvert in my driveway?

If your driveway connects to a state-maintained road, yes — NCDOT requires a driveway permit for a new entrance or a changed one, and the district office will specify the pipe size and length. There's generally no state permit for culverts on private roads or interior farm lanes, though stream crossings can trigger buffer rules. We'll tell you which situation you're in.

What areas do you install culverts in?

We work out of Greensboro and cover the whole Triad plus roughly an hour and twenty minutes out — north to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Rural roads in every direction are where most of our culvert work is.

How far is A&R Land Services from Burlington?

We're based in Greensboro, about 25 minutes from Burlington. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle culverts near Big Alamance Creek and I-40 / I-85?

Yes. We work throughout Burlington and the surrounding Alamance County area, including properties around Big Alamance Creek, I-40 / I-85 and Haw River. If you're outside the town limits, send the address and we'll confirm it's in range.

What does culverts typically involve on a Burlington property?

Entrances that flood or wash out every big storm is the most common version of it around Burlington. We look at the ditch, estimate the drainage area, check for utilities and figure out whether the road is state-maintained. If it is, we'll walk you through the NCDOT driveway permit and what size pipe they'll require. Permit requirements and distance from Greensboro is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Culverts in Burlington, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate