Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Alamance County · 38 min from Greensboro

Trail Cutting for Saxapahaw & Alamance County

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

Wooded land in Saxapahaw is a lot more fun with a trail through it. A&R Land Services cuts walking loops, UTV paths and equipment lanes across Alamance County with a forestry mulcher, leaving a chip floor you can ride the same day. We're about 38 minutes away in Greensboro.

Nearly every trail we cut in Alamance County crosses a creek or a wet-weather branch. On Saxapahaw properties we place the crossing where the bottom's firm, keep the clearing narrow inside the buffer, and set stone or a culvert if you'll be driving it in the wet.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Saxapahaw ground conditions and how they shape trail cutting

Everything on the river side is inside the Jordan Lake watershed, which carries some of the stricter buffer rules in the state, and the river is also part of the state's Haw River paddle trail — so anything near the water is handled carefully and we keep mulch on every slope. Steep lots mean we never scrape; we mulch in place and seed. Alamance County erosion control permits apply past an acre. The bluff ground drains fast and carries equipment most of the year; the river terraces stay soft until early summer.

Around Cane Creek, Saxapahaw Lake and dam and Haw River Ballroom, the properties we're usually called to look like this:

  • Cattle and hay farms along NC-87 reclaiming pasture and fence rows
  • Hunting tracts on the river wanting lanes, trails and brush knocked back
  • Old mill-village lots with wisteria and kudzu over the outbuildings

What trail cutting jobs look like around Saxapahaw

If you're near Haw River Ballroom or the Swepsonville community, odds are your situation is one we've already worked: cattle and hay farms along NC-87 reclaiming pasture and fence rows, or horse trails and riding paths on farm property.

The trail cutting approach for Alamance County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

We also cover trail cutting in Graham, Mebane and Pittsboro, so if you've got property in more than one spot we can often batch the work.

Why Saxapahaw property owners call A&R

Greensboro to Saxapahaw is about 38 minutes, which keeps a half-day trail job worth doing and makes it easy to come back and add a loop or a spur later.

Send us an aerial with the route sketched in and a couple of photos of the woods. We'll give you a real number for cutting it in Saxapahaw.

Trail Cutting in Saxapahaw: questions

How much does it cost to cut a trail through the woods?

Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.

Will the trail turn into mud?

Not if it's routed right. A trail that runs straight down a slope on Piedmont clay becomes a gully; one that follows the contour and crosses slopes at an angle sheds water. We route for drainage, keep the mulch layer on the path, and put gravel on any stretch that's going to be wet no matter what — usually creek approaches and the bottom of climbs.

How far is A&R Land Services from Saxapahaw?

We're based in Greensboro, about 38 minutes from Saxapahaw. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near Cane Creek and Saxapahaw Lake and dam?

Yes. We work throughout Saxapahaw and the surrounding Alamance County area, including properties around Cane Creek, Saxapahaw Lake and dam and Haw River Ballroom. If you're outside the town limits, send the address and we'll confirm it's in range.

What does trail cutting typically involve on a Saxapahaw property?

Fire and emergency access through dense acreage is the most common version of it around Saxapahaw. Creek crossings get stone or a culvert if scoped. Wet stretches and climbs get gravel if you want them drivable year-round. We make a final pass to knock stubs flush and leave a clean mulch floor. Creek and wet crossings and whether they get stone or a culvert is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Trail Cutting in Saxapahaw, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate